1. Multi-View Sketching Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Multi-View Sketching
Project Lead The Way, Inc.
Copyright 2007

2. Learning Objectives
Be able to define Multi-View Drawing, Projection Plane, the three dimensions, Orthographic Projection.
De able to determine if you need one, two or three views
Be able to create an Orthographic Projection of a 3-D object.

3. Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Multi-View Drawing
Shows two or more two-dimensional views of a three-dimensional object.
Provides the shape description of an object.
When combined with dimensions, serves as the main form of communication between designers and manufacturers.
Project Lead The Way, Inc.
Copyright 2007

4. Example of Multi-view Sketch
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Example of Multi-view Sketch
LEFT SIDE
RIGHT SIDE
FRONT
Note that hidden lines are not shown for simplicity.
Do you think the view chosen for the Front View is the best choice? Why or why not?
Remember the recommendations for how to choose a front view:
Most natural position or use
Shows best shape and characteristic contours
Longest dimensions
Fewest hidden lines
Most stable and natural position
An argument can be made for using what would be the Left Side view <click> for the Front View in that it shows the characteristic shape of the chair, but the Front View shown in the slide provides a better view of the decorative wood work on the back of the chair. Either view would suffice as a front view.
Dining Chair
Project Lead The Way, Inc.
Copyright 2007

5. Multi-View Drawing Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Multi-View Drawing
Project Lead The Way, Inc.
Copyright 2007

6. Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Multi-View Drawing
All three-dimensional objects have width, height, and depth.
Width is associated with an object’s side-to-side dimension.
Height is associated with an object’s top-to-bottom dimension.
Depth is associated with front-to-back distance.
Project Lead The Way, Inc.
Copyright 2007

7. Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Multi-View Drawing
A typical multi-view drawing includes a top view, a front view and a right side view.
TOP VIEW
A typical multi-view drawing includes a top view, a front view and a right side view.
FRONT VIEW
RIGHT SIDE VIEW
Project Lead The Way, Inc.
Copyright 2007

8. Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Multi-View Drawing
45°
The isometric view shows the width, height and depth of the object. The height of the object is obvious in the front view and the right side view. The width is displayed in the front view and the top view. And the depth is shown in the top and right side. Notice how all views are aligned such that line up and construction lines can be used to help project the views from the first view drawn.
Project Lead The Way, Inc.
Copyright 2007

9. Orthographic Projection
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Orthographic Projection
A technique used to create Multi-View drawings.
Any projection of the features of an object onto an imaginary plane of projection.
The projection of the features of the object is made by lines of sight that are perpendicular to the plane of the feature
Project Lead The Way, Inc.
Copyright 2007

10. Orthographic Projection
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Orthographic Projection
The best way to understand orthographic projection is to imagine an object contained inside a glass box.
Project Lead The Way, Inc.
Copyright 2007

11. Orthographic Projection
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Orthographic Projection
There is a total of six glass walls surrounding the object. Each wall represents a projection plane onto which a two- dimensional object view will be created.
Tell Students: Notice the six glass walls that represent planes and six views can be projected from this view. Three views are typically used and they are top, front, and right side. The opposite of each view being bottom, back, and left side also exist.
Project Lead The Way, Inc.
Copyright 2007

12. Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Projection Plane
Also referred to as a plane of projection or picture plane, is an imaginary surface that exists between the viewer and the object.
The surface onto which a two-dimensional view of a three-dimensional object is projected and created.
Project Lead The Way, Inc.
Copyright 2007

13. Orthographic Projection
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Orthographic Projection
Start by focusing only on the front projection plane.
A person standing in front of the object would see only the five corners identified in black. 2 3 1 4
line of sight
at 90° angle to projection plane 5
Project Lead The Way, Inc.
Copyright 2007

14. Orthographic Projection
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Orthographic Projection
Projection lines are used to project each corner outward until they reach the projection plane.
Project Lead The Way, Inc.
Copyright 2007

15. Orthographic Projection
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Orthographic Projection
The visible edges of the object are then identified on the projection plane by connecting the projected corners with object lines.
Project Lead The Way, Inc.
Copyright 2007

16. Orthographic Projection
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Orthographic Projection
The orthographic projection process is then repeated on the other projection planes.
There are six principle planes as indicated here. In most cases, three or fewer orthographic projections are needed in a multi-view in order to fully describe and object.
Project Lead The Way, Inc.
Copyright 2007

17. Orthographic View Selection
Noteworthy
Recommendations for how to select the front view
Most stable and natural position or use
Shows best shape and characteristic contours
Longest dimensions
Fewest hidden lines
The view of the side that provides the most information about the object is generally chosen as the FRONT view. Finding the best front view of a part can be difficult. Two or more sides may look like the best solution for a front view.
These are the same recommendations given in the Oblique and Isometric Pictorial presentation.
When selecting a front view, compare all side views and choose a front view based on the list of criteria in this list.

18. Orthographic View Selection
No hidden edges
Best shape
Description
Longest Dimension
Most natural position
The front view choice dictates the pictorial orientation as well as the orthographic projection labels.
BEST FRONT VIEW

19. Number of Orthographic Projections
One View
Uniform thickness or shape
Two views would be identical
All dimensions properly and easily shown on one view
Noteworthy
Only one view may be required if the part has a uniform thickness (such as a flat plate) or a uniform shape (such as a cylindrical shape).
If two views would be identical and all dimensions are easily shown on one view, additional views may not be necessary.

20. Number of Orthographic Projections
Noteworthy
Two Views
Symmetrical part
A third view would be identical to one other
Second view is necessary for depth
Only two views may be required if the part is symmetrical such that a third view would be identical to another. However a second view is necessary to show a depth that is not constant.

21. Sketching a Multi-View Drawing
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Sketching a Multi-View Drawing
Given the overall dimensions of the object, a pencil, and a sheet of graph paper, a sketching multi-view drawing can be easily done using points, construction lines, and object lines.
There are several ways to sketch a multi-view drawing. Feel free to use the best way that make since to you. Teachers may choose to explain from the board or overhead using an example and have students follow along.
Project Lead The Way, Inc.
Copyright 2007

22. Sketching a Multi-View Drawing
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Sketching a Multi-View Drawing
Step 1 - Boundary Box: Layout the boxes within which the individual views will occur using points and construction lines.
TOP
Noteworthy
FRONT
RIGHT SIDE
Project Lead The Way, Inc.
Copyright 2007

23. Sketching a Multi-View Drawing
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Sketching a Multi-View Drawing
Step 2 - Outside Faces: Use construction lines between the views to indicate the geometry of the views.
Three examples of edges that are translated to construction lines are shown here.
Project Lead The Way, Inc.
Copyright 2007

24. Sketching a Multi-View Drawing
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Sketching a Multi-View Drawing
Step 3 – Inside:Faces Identify the visible edges with Object lines.
Project Lead The Way, Inc.
Copyright 2007

25. Sketching a Multi-View Drawing
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
Sketching a Multi-View Drawing
Step 4 - Hidden: Inside: Locate hidden lines.
Project Lead The Way, Inc.
Copyright 2007

26. Historical Example
Leonard P. Karr ( ) designed a man-sized hunting blind shaped like a goose called Super Goose, 1991.
How would you label the views presented in the drawing?
Are Mr. Karr’s views properly aligned based on the orientation presented here?
How would you rearrange the views to orient

27. Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
A Question…
Each of the blocks at right has the same overall dimensions and color. What else do they have in common?
You could have students practice sketching the multi-view drawings of these objects individually or in groups to help determine the answer before revealing it.
Project Lead The Way, Inc.
Copyright 2007

28. They all have identical top views!
Multi-View Sketching
Introduction to Engineering Design
Unit 2 Technical Sketching and Drawing
A Question…
Each of the blocks at right has the same overall dimensions and color. What else do they have in common?
They all have identical top views!
Project Lead The Way, Inc.
Copyright 2007

29. Reinforcement Activity: 2.4 Multi-View Sketching
Top
Front
Side A 9 3 21 B C D E F G H
When finished with the Worksheet, Start on the Unit 2 Practice Exam.
Complete the sketches in your notebook.

30. Box, Outside, Inside, Hidden

31. Box, Outside, Inside, Hidden