1. Injection mold specification
Client
fuji
Model Name
Fuji-xerox
Part Name
Cover under r
Part No.
802b086500_k001
DFM
Ming L.

2. Integral Corrective Action List
ICAL
Page
OPEN POINTS
SOLUTIONS/ACTION
WHO 1 2 3 4
Plastic Flow Analysis
Ok?
Parting _ line-1
Please confirm. 5
Parting _ line-2 6
Parting _ line-3 7
SLIDE 8
SLANT 9
MODIFY1
Waiting for reply. 10
MODIFY2 11
MODIFY3 12
MODIFY4 13
MODIFY5 14 15
I C A L
Integral Corrective Action List
1-Date of opening (all dates in2005)
2-Date of beginning of action
3-Date foreseen for validation
4-Date of validation (closing)
DFME Follow-up issue

3. Plastic Flow Analysis
SIDE GATE

4. Parting _ line-1
cavity
core
cavity
Parting-surface
core

5. Parting _ line-2
(right&left)

6. Parting _ line-3

7. SLIDE

8. SLANT

9. Slide steel is too thin,suggest modify it as view A.(RIGIG&LEFT)
0.5
SLIDE
Slide steel is too thin,suggest modify it as view A.(RIGIG&LEFT)
(REDUCE PLASTIC)
View A
MODIFY
ORIGINAL

10. MODIFY2
Reduce plastic 3mm.
Steel is too thin.
1.8 3
16.5

11. The grid surface(all around) has no draft.suggest reduce
MODIFY3
The grid surface(all around) has no draft.suggest reduce
plastic 2º to release mold.

12. All of green surface have no draft.suggest reduce plastic
MODIFY4
All of green surface have no
draft.suggest reduce plastic
to release mold as VIEW A.
REDUCE PLASTIC
VIEW A

13. These red surfaces can’t texture because
MODIFY5
These red surfaces can’t texture because
of it just have 1º draft on slide side.