1. DoIT FY09 IT Budget Review
New Mexico Department of Public Safety
Computer Aided Dispatch (CAD) / Records Management System (RMS) Project
State Library / Yucca Room # October 23, 2007

2. EXECUTIVE STAKEHOLDERS
Computer Aided Dispatch (CAD) / Records Management System (RMS) Project Change Request
EXECUTIVE STAKEHOLDERS
Secretary Greg Fouratt, DPS
Chief Pete N Kassetas, State Police
Information Technology Division
Chief Information Officer, Ron Burton
DPS Business Owner, Kimberly Clark

3. CAD
The New Mexico Department of Public Safety is planning the replacement of the existing Computer Aided Dispatch (CAD) system with an integrated CAD and Records Management System (RMS).
CAD is one of the core systems DPS provides to the State Police and other Law Enforcement Agencies (LEAs). CAD is the system used to dispatch 911 calls out to the officers, map the call location in the dispatch center, provide Automatic Vehicle Location (AVL) for officers in the field, and provide National Crime Information Center (NCIC) access within the application. CAD is essential in providing rapid response from LEAs to crime/incident scenes.
The current CAD has been in place for over
10 years, and is at end of life.

4. CAD / RMS
One of the primary missions of DPS is to support LEAs throughout the State of New Mexico with their mission in protecting citizens. DPS fulfills this through a variety of means, including access to federal and state criminal justice data and systems, direct technical support and providing use of the DPS CAD system to Sierra, Valencia and Luna Counties.
The mission critical nature of the CAD system, and the impending discontinuation of vendor support, increase the urgency of replacing CAD in the very near future.

5. CAD

6. Computer Aided Dispatch (CAD) / Records Management System (RMS) Planning Project
The purpose of this request is to continue the planning phase to include:
Selected CAD vendor contract negotiations
Continue selected IV&V vendor contract negotiations
DPS was allocated $300,000 in FY13 and has used $50,000 for project initiation and $244,079 for Planning RFP
DPS is requesting $550,000 of allocated funds to continue the planning phase of the project

7. CAD/RMS
Major Project Deliverable Budget Due Date Project and Performance Measure THIS WAS COMPLETED IN THE INITIATION PHASE Consultant to assist with CAD/RMS analysis $50,000 1/31/13 Initiate Current Environment (Technical and Business) Assessment 1/31/13 Peer and Best Practices Summary 1/31/13 Vendor Market and Capability Summary 1/31/13 Future CAD/RMS Business and Technical Overview 1/31/13 Alternatives Analysis 1/31/13 Identify Gaps between Current and Future Environments 1/31/13 Determine Functional and Technical Priorities 1/31/13 Total $50,000

8. CAD/RMS
Major Project Deliverable Budget Due Date Project and Performance Measure THIS HAS BEEN COMPLETED TO DATE IN PLANNING Analysis/Recommendations Report, Creating CAD RFP $127,688 12/20/13 Planning Consultant for CAD Business Analysis $ 52,421 06/25/14 Planning Consultant to update map data $ 61,877 06/25/14 Planning Consultant help to create RMS RFP $ 52,093 06/30/14 Planning Consultant help to evaluate CAD RFP Responses $ 40,015 03/30/15 Planning Total $ 334,094

9. CAD/RMS
Major Project Deliverable Budget Due Date Project and Performance Measure THIS CHANGE ORDER WILL FUND THE FOLLOWING ESTIMATED COSTS Consultant help to evaluate CAD RFP Responses $ 40,000 03/30/15 Planning (Work has been completed) Professional Services for IV&V $100,000 01/20/17 Planning (IV&V will be ongoing through project completion) Professional Services Mapping and Network $ 70,000 08/30/15 Planning Hardware $330,000 08/30/15 Planning Software $ 10,000 06/30/15 Planning Total $550,000

10. CAD/RMS
Project Timeline

11. Effect on DoIT Infrastructure
All purchases will meet DoIT Guidelines for hardware and software requirements.
No additional infrastructure impact is projected.
THANK YOU FOR YOUR CONSIDERATION
OF THIS CAD / RMS REQUEST.