1. Section 5.3

2. There a stream usually carries is away.
The transfer of rock and soil downslope due to gravity is called mass movement.
Ex: Landslides
The combination of weathering and mass movement produce most landforms.
Once weathering weakens and breaks rock apart, mass movement moves the debris downslope.
There a stream usually carries is away.
Stream valleys are the most common of Earth’s landforms.

3. Several factors make slopes more susceptible to the pull of gravity.
Saturation of surface materials with water.
Oversteepening of slopes.
Removal of vegetation.
Earthquakes.
Water:
Heavy rains and rapid melting of snow can trigger mass movement by saturating surface materials with water.
When the pores in sediment become filled with water, the particles slides past one another easily.

4. 2. Oversteepened Slopes:
Loose soil particles can maintain a relatively stable slope up to a certain angle (25 to 40°), depending on the size and shape of the particles.
If the steepness of the slope exceeds the stable angle, mass movement is likely.
Such slopes are said to be oversteepened.
This can result when:
Streams undercut a valley wall.
Waves pound against the base of a cliff.
People, through excavation during construction of roads/buildings.

5. 3. Removal of Vegetation:
Plants make slopes more stable because of their root systems.
When plants are removed, mass movements are likely.
4. Earthquakes:
Earthquakes are one of the most dramatic triggers of mass movements.
They can dislodge rock and unconsolidated material, which can cause more damage than the earthquake itself.

6. The process responsible for moving material downslope under the influence of gravity is called
Erosion
Weathering
Mass movement
Soil formation

7. What is the force behind mass movements?
The Sun’s energy
Flowing water
Gravity
Moving ice

8. Which of the following is not true about mass movements?
Some mass movements are too slow to be seen.
Mass movements always lead to landslides.
Gravity is the driving force behind all mass movements.
Mass movements are always downslope.

9. What factor commonly triggers mass movements?
Saturation of surface materials with water.
Earthquakes
Removal of vegetation
All of the above

10. Why can the removal of vegetation trigger mass movements?
The soil loses nutrients and begins the crumble.
The plant roots bind the soil and regolith together.
The shaking triggers mass movements.
The plant roots lubricate the loose sediment.

11. Oversteepened slopes often lead to mass movements because
Plants cannot grow on them.
The angle of their slope is between 10 and 20 degrees.
The angle of their slope is less than 20 degrees.
The angle of their slope is greater than 40 degrees.

12. During what season would you expect mass movements to be a greater threat?
A dry summer.
A wet spring before vegetation is growing.
A wet spring with lots of growing vegetation.
A dry autumn after the leaves have turned.

13. Geologists classify mass movements based on the kind of material that moves, how it moves, and the speed of the movement.
Rockfalls:
Occurs when rocks or rock fragments fall freely through the air.
Common of slopes that are too steep for loose material to remain on the surface.
Result from the mechanical weathering of rock caused by freeze-thaw cycles or plant roots.
Sometimes trigger other mass movements.

15. A block of material moves suddenly along a flat, inclined surface.,
2. Slides:
A block of material moves suddenly along a flat, inclined surface.,
Slides that include segments of bedrock are called rockslides.
Often occur in high mountain areas.
i.e. Andes, Alps, Rockies.
Rockslides are among the fastest mass movements (speeds over 200 kmph ≈ 125 mph).
Triggered by rain or melting snow.

17. 3. Slumps:
Is the downward movement of a block of material along a curved surface.
Usually does not travel very fast or very far.
Slumps leave a crescent-shaped cliff just above the slump.
Common on oversteepened slopes where the soil contains thick accumulations of clay.

19. Follows the contours of the canyon, taking trees and boulders with it.
4. Flows:
Mass movements of material containing a large amount of water, which move downslope as a thick liquid.
Flows that move quickly, called mudflows, are common in semiarid mountainous regions.
i.e. Southern California
Follows the contours of the canyon, taking trees and boulders with it.

21. Earthflows are flows that move relatively slow – from about a millimeter per day to several meters per day, and may continue for years.
Occurs most often on hillsides in wet regions.
When water saturates the soil and regolith on a hillside, the material breaks away, forming a tongue-shaped mass.
They range in size from a few meters long and less than 1 m deep to over 1 km long and more than 10 m deep.

23. The slowest type of mass movement.
5. Creep:
The slowest type of mass movement.
Usually only travels a few millimeters or centimeters per year.
Because it is slow, you cannot directly observe it.
Alternating between freezing and thawing contributes to creep.
Effects are easy to recognize:
Structures once vertical tilt downhill.
Displacement of fences.
Cracks in walls and underground pipes.

25. A mass movement that involves the sudden movement of a block of material along a flat, inclined surface is called a
Slide
Rockfall
Slump
Flow

26. When a block of material moves downslope along a curved surface, the type of mass movement is called
A rockfall
A rockslide
A slump
Creep

27. What is the slowest type of mass movement?
A slump
A rockfall
An earthflow
Creep

28. A relatively rapid form of mass movement that is most common in dry mountainous regions is
Creep
A mudflow
A slump
An earthflow

29. Which of the following statements best describes a slump?
Slippage of a block of material moving along a curved surface.
Blocks of rock sliding down a slope.
Rapid flow of water-saturated debris, most common in mountainous regions.
Slow downhill movement of soil and regolith.

30. Alternate freezing and thawing often leads to
Creep
Slumps
Mudflows
Earthflows