1. Design Challenge
Key Chain

3. Define the Goal
Goal: Design a personalized key chain holder

4. Do background research
What information would we need to know?
Because this a quick challenge, this step can be skipped.

5. Specify requirements Must represent you
Must be small, 1inch x 1.5 inches
Durability must be considered
Attachment to a ring or other things must be considered
Turn off bed adhesion
Everyone prints their own

6. Brainstorm, Evaluate and Choose
Come up with as many ideas as you can: Quantity over quality
Combine ideas
Evaluate and pick one
For your notebooks, I should see evidence of a few different ideas, list or pictures

7. Develop a Solution
Each person in your group is going to use CAD (Tinkercad or Inventor) to design a solution.
As a group, you will decide which one it the best, and we will 3D print one per group.
Use a decision matric to decide the best, if you can agree
For your notebooks, either make a quick sketch of your final design or print a picture of your cad model

8. Test Solution
Print it.

9. After it is printed, evaluate it.
How effective was your solution?
Recommended improvements
How would you optimize/redesign is you could start over?
General Recommendations.

10. Communicate results
Gallery walk when we are done.