1. Using British Standards
Engineering
Using British Standards

2. British Standards
The British standard is an agreed way of doing something.
Benefits
Everyone understand
Consistency in all drawings
Same symbols
The British standard is an agreed way of doing something. If everyone follows the standard everyone will be able to understand what is happening.
Can they give an example of British Standards that they already know about in Graphic Communication?
British Standards can apply to Safety, the Environment and in our case drawings.
If we draw to British Standards people throughout the world will be able to understand and read our drawings

3. Line Types Construction Outline Hidden Centre Folding Cutting Plane
Ask students to draw their interpretation of the lines onto the board. Bring up a student to draw each one on the board.

4. Line Types Construction Outline Hidden Centre Folding Cutting Plane
Explain the importance of line types and how we need them to be able to explain to us the shape.

5. Example of using line types
What do you imagine the of version of this Elevation to look like?
Elevation

6. Example of using line types
What do you imagine the of version of this Elevation to look like?
End
Elevation
Elevation

7. Example of using line types
What if a centre line is added?
What does the centre line mean?

8. Example of using line types
What if a centre line is added?

9. Dimensioning -Chain Leader Lines must not touch.
Arrow heads must be filled.
Numbers must be on top of the line.
Smaller sizes must fit underneath the overall size.
110 20 15 50

10. Dimensioning – Parallel
Leader Lines must not touch.
Arrow heads must be filled.
Numbers must be on top of the line.
Smaller sizes must fit underneath the overall size. 60 50 35 30

11. Dimensioning - Circles
Centre of the circle must be marked.
The arrowheads must be filled.
The dimension line must run straight through the centre of the circle.
The symbol Ø must be before the size.
The size must be above the line.
Ø60 +
Ø40
Diameter’s can only be given when it is a full circle.

12. Dimensioning – Arc’s/Curves
Centre of the circle must be marked.
The arrowhead must be filled.
The dimension line must run straight through the centre of the circle.
The symbol R must be before the size.
The size must be above the line.
R15
A Radius can only be given when it is an arc/ curve not a circle

13. Dimensioning – Angles Leader line must not touch.
The arrowhead must be filled/
The size must be inside the line.
The size must have the ° symbol after it.
45°

14. Dimensioning Sketch the drawing below.
Dimension the drawing using British Standards.
Students should apply the British standards shown to this sketch. They can then come up and do it on the board.