1. New IBIS Cookbook 1.0 Introduction 2.0 Pre-Modeling Steps
1.1 Quick Overview of an IBIS File
1.2 Steps to creating an IBIS Model
2.0 Pre-Modeling Steps
2.1 Basic Decisions
Model Version and Complexity
Specification Model vs. Part Model
Fast and Slow Corner Model Limits
Inclusion of SSO Effects
Mention of [Pin Mapping]
2.2 Information Checklist
2.3 Tips For Component Buffer Grouping
3.0 Extracting the Data
3.1 Using Spice to IBIS (s2ibis)
3.1 Extracting I/V and Switching Data via Simulations
3.1.1 Extracting the I/V Data
Simulation Setup
Sweep Ranges
Making Pullup and Power Clamp Sweeps Vcc Relative
Diode Models
ALL OTHER INFORMATION SHOWN THROUGH EXAMPLES
3.1.2 Extracting the Ramp Rate or V/T Waveform Data
Extracting Data for the [Ramp] Keyword
Extracting Data for the Rising and Falling Waveform Keywords
Minimum Time Step
3.2 Automatic tool extraction and checklist
Right ranges?
Right timestep?
Point selection?
Right clamp counting?
3.3 Obtaining I/V and Switching Information via Lab Measurement

2. New IBIS Cookbook 4.0 Putting the Data Into an IBIS File
4.1 IBIS File Header Information
4.2 Component and Pin Information
4.3 The [Model] Keyword
Parameter section
Temperature and Voltage Keywords
I/V data section
Pulldown
Ground Clamp
Pullup
Power Clamp
Extrapolation Errors
[Ramp] and Waveform Tables
4.4 Thresholds & Delay
Vinh, Vinl
[Model Spec]
4.5 External Package Models
See ICM & Package Cookbook
4.6 Verifying the IBIS file
See Quality and Accuracy Handbooks
Parser notes: version makes a difference

3. New IBIS Cookbook 5.0 Examples of Common Model Types
CMOS totem-pole (input, output, I/O)
Concept: include only necessary I-V and V-t curves
I/O CMOS buffer with termination
Concept: clamp “counting”
PECL/ECL
Concept: supply referencing
Multi-stage buffers
Concept: Using [Driver Schedule]
Differential buffers
Concept: Using [Diff Pin]
Pre-emphasis? Current-mode?
[Bus Hold]
Concept: Using [Submodel]
Highlight only differences from generic steps shown earlier

4. New IBIS Cookbook 6.0 Validating the Model 7.0 Correlating the Data
8.0 Resources
Simple updates

5. ICM Cookbook 1.0 Introduction 2.0 Pre-Modeling Steps
1.1 Quick Overview of an ICM File
1.1.1: Families
1.1.2: Models
1.1.3: Sections
2.0 Pre-Modeling Steps
2.1 Basic Decisions
What cases within the family?
S-parameters or RLGC?
RLGC: Lumped or Distributed?
RLGC: What frequency?
Tree or Nodal?
2.2 Information Checklist
Pictures? Lengths?