1. To Tune a loop, open the Operator display for the loop in question
DeltaV Tune Tutorial
To Tune a loop, open the Operator display for the loop in question

2. Click on the detail icon
Now click in the Tune icon

3. Give the loop a step size enough to move the valve!
Then start the test

4. The test is running, note the output change

5. Now the test is done and the
recommended setting are shown
To view gain and phase margins
click on Simulate

6. Gain and phase margins

7. DeltaV Tune “Reality Check” Always do a On the recommended settings.
In some cases you may want to use different settings