1. CASE 3: Multistory Building
Wall elements
VIA / TCU 5th semester workshop A2018
VIA University College
TCU-VIA Workshop – A2016 1

2. CASE 3: Multistory Building
Wall elements and roof
VIA / TCU 5th semester workshop A2018
VIA University College
TCU-VIA Workshop – S2016 2

3. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
Wooden wall elements combined with heavy internal or external walls
VIA University College 3

4. CASE 3: Multistory Building
Wooden elements
CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
External walls made out of wood normally consist of a frame with insulation between the studs. Inside with a dpm and a covering consisting of boards.
Examples of internal cladding fixed from the factory could be:
Wood wool cement boards
Plywood
Plasterboard
Fibergypsum board
Hardboard
Chipboard
Furring for later fixing of boards
after erecting the facade elements
The choice of boards will depend of different factors.It could be fire-, moisture-, stability-, or sound.
VIA University College 4

5. CASE 3: Multistory Building
Placement of external horizontal and vertical cladding
VIA / TCU 5th semester workshop A2018
VIA University College 5

6. CASE 3: Multistory Building
Flashing on top of the window
VIA / TCU 5th semester workshop A2018
VIA University College 6

7. CASE 3: Multistory Building
Placement of window sill made out of steel/zinc.
VIA / TCU 5th semester workshop A2018
VIA University College 7

8. CASE 3: Multistory Building
Roof elements
VIA / TCU 5th semester workshop A2018
Wooden element
What is a roof element?
It is a prefabricated building component with semi finished roof, insulation and finished ceiling.
Where is it used?
Very often used for industrial-, office-, and dwelling buildings.
Wooden roof elements can be used at all roof angles or produced with the slope from the factory.
VIA University College
TCU-VIA Workshop – S2016 8

9. CASE : Multistory Building
Damp proff membranes
Roof elements
VIA / TCU 5th semester workshop A2018
Unventilated roof elements is much more sensitive for the moisture condition when building.
If a Hygrodiode membran is used as dpm any moisture in the element will be driven to the dpm where it condensates if the sun shines.
Remember that the consultants must secure that no moisture will enter into the element while mounting. You must describe to:
- Deliver the elements with the first layer of bitumen fixed.
Place a bitumen felt strip following the mounting sequence
During night seal the elements
Hygrodiode
PVC-foil
VIA University College 9

10. CASE : Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 10

11. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 11

12. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 12

13. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 13

14. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 14

15. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 15

16. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 16

17. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 17

18. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 18

19. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 19

20. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 20

21. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 21

22. CASE 3: Multistory Building
VIA / TCU 5th semester workshop A2018
VIA University College 22

23. CASE 3: Multistory Building
Concrete Balconies
VIA / TCU 5th semester workshop A2018
VIA University College 23

24. CASE 2: Multistory Building
VIA University College 24