1. BIOS & CMOS
To Navigation page

2. We have covered the following subjects:
BIOS ROM
CMOS & CMOS Battery
Configuring the BIOS
Configuring the BIOS. Cont
Configurable Devices
Un configurable Devices
Option ROM
Device Drivers, Accessing CMOS Setup, Editing The BIOS Parameters, Navigating, Saving and Exiting
Summary

3. BIOS
The BIOS program controls the start-up process and loads the operating system into memory.
The BIOS is an example of firmware.
Most BIOS chips are 64k in size, though there is 384k address space available for the BIOS to use.
SCSI devices include a BIOS chip on a device itself. These devices have their own ROM chip called an option ROM.
What is the BIOS?
BIOS stands for, Basic input output system. The BIOS is a program stored in a read-only memory (ROM) chip that the CPU automatically loads and executes when it receives power.

4. CMOS
The CMOS battery can be a low-voltage dry cell, lithium mounted on the motherboard, or even AA batteries in a housing clipped on a wall inside of the case. The electric current is about 1 millionth of an amp and can provide effective power for years.
If the voltage of the battery drops significantly, you may lose your CMOS settings every time you power-off or power-on your computer. If a CMOS battery fails, replace it and afterwards re-enter the CMOS information.
What is CMOS?
CMOS stands for Complementary Metal-Oxide Semiconductor (CMOS).
CMOS memory is a special RAM chip powered and maintained by a small battery that holds basic configuration data your computer needs in order to start.

5. Configuring BIOS System Time/Date - Set the system time and date
Boot Sequence - The order that BIOS will try to load the operating system
Plug and Play - A standard for auto-detecting connected devices; should be set to "Yes" if your computer and operating system both support it
Mouse/Keyboard - "Enable Num Lock," "Enable the Keyboard," "Auto-Detect Mouse"...
Drive Configuration - Configure hard drives, CD-ROM and floppy drives
Memory - Direct the BIOS to shadow to a specific memory address
Security - Set a password for accessing the computer
Power Management - Select whether to use power management, as well as set the amount of time for standby and suspend
Exit - Save your changes, discard your changes or restore default settings
To enter the CMOS Setup, you must press a certain key or combination of keys during the initial startup sequence. Most systems use "Esc," "Del," "F1," "F2," "Ctrl-Esc" or "Ctrl-Alt-Esc" to enter setup. There is usually a line of text at the bottom of the display that tells you "Press ___ to Enter Setup."
Once you have entered setup, you will see a set of text screens with a number of options. Some of these are standard, while others vary according to the BIOS manufacturer. Common options include:

6. Configuring BIOS. Cont
Be very careful when making changes to setup. Incorrect settings may keep your computer from booting.
When you are finished with your changes, you should choose "Save Changes" and exit. The BIOS will then restart your computer so that the new settings take effect.
The BIOS uses CMOS technology to save any changes made to the computer's settings.
With this technology, a small lithium or Ni-Cad battery can supply enough power to keep the data for years. In fact, some of the newer chips have a 10-year, tiny lithium battery built right into the CMOS chip!

7. Configurable Devices The main bootable devices in the BIOS are:
Hard Disk Drives
Floppy Drives
CDROM Drives
Then you have the Boot device priority:
1st Boot Device [Floppy drive]
2NDBoot Device [CDROM]
3rdBoot Device [Hard Drive]
4thBoot Device [ ]

8. Un-configurable Devices
A computer system can contain several BIOS firmware chips.
The motherboard BIOS typically contains code to access fundamental hardware components such as the keyboard, floppy drives, ATA (IDE) hard disk controllers, USB human interface devices, and storage devices.
In addition, plug-in adapter cards such as SCSI, RAID, Network interface cards, and video boards often include their own BIOS, complementing or replacing the system BIOS code for the given component.
Plug and play and hot swappable devices are not configurable in the BIOS because the Plug and play and hot swappable devices also have BIOS.

9. Option ROM
An Option ROM typically consists of firmware that is called by the system BIOS. For example, an adapter card that controls a boot device might contain firmware that is used to connect the device to the system once the Option ROM is loaded.

10. In this short video, which can be paused and rewound, you can see how to:
Access CMOS Setup
Navigate around CMOS
Edit the BIOS Parameters
Find Device Drivers
Save and Exit

11. Summary So what have we talked about?
We have talked about the CMOS & BIOS. We hope that this presentation has helped you to understand the BIOS & CMOS better.
Any Questions?