1. Jeopardy
Drafting Equipment

2. Standard
AC – IDD – 4: Student will demonstrate the correct use and management of all drafting tools and supplies

3. Directions One person from each group needs to come up and get:
A few Tissues, Dry Erase Marker and a laminated piece of paper, score sheet
Group around the following tables:
8, 6, 16, 14 (in front of table with printer), 18, 20
Group 1 will select the first question, but ALL groups will write down their answer
I will give approximately 30 seconds to answer each question then will call for ALL groups to hold up their answers
For each question you get right, you get that number of points
For each question you get wrong you lose that number of points
Each group keeps up with their own scores – DO NOT CHEAT
Record score on the score sheet provided
For a daily double you can chose to wager no more than the current amount of points you have, but you must decide how much to bet BEFORE the question is shown

4. Equipment I
Equipment II
Equipment III
Equipment IV
100
200
300
400
500

5. Equipment I: 100 _______ is a template used draw circle and arcs
See Answer
Circle Template

6. Equipment I: 200
Drafting pencils are high quality pencils with ________________.
See Answer
High quality pencils with varying sizes of lead

7. Equipment I: 300
What is the piece of equipment called and what is it used for?
See Answer
Ames lettering guide: Used to draw guidelines for lettering

8. Equipment I: 400
What is the piece of equipment called and what is it used for?
See Answer
Adjustable Triangle: Used to draw angles from 0 – 90 degrees

9. Equipment I: 500 Daily Double
What is the difference between a compass and dividers?
Compass: Used to draw circles and arcs
Dividers: Used to divide lines into equal spaces, used to transfer distances, or used to compare sizes of drawing elements
See Question
See Answer

10. Equipment II: 100
________ is used for basic drawings and floor plans. Inches and fractions of feet represent feet. (identified based on fractions at end of scale).
See Answer
Architects Scale

11. Equipment II: 200 What is this piece of equipment and what is it?
See Answer
Ellipse Template: Template used to draw ellipses

12. Equipment II: 300 A drafting table is a ___________________.
See Answer
Smooth, firm surface used to draw on

13. Equipment II: 400
What is the piece of equipment called and what is it used for?
See Answer
Irregular curve: Used to draw non-circular curves

14. Equipment II: 500
What is this piece of equipment and what is it used for?
See Answer
Engineer’s Scale: Used to draw maps , charts, and any drawings that require decimal measurements

15. Equipment III: 100
A ________ brushes eraser crumbs and debris from the drafting table.
See Answer
Dusting Brush

16. Equipment III: 200
A _______ is used to draw horizontal lines and support triangles to draw vertical and angled lines.
See Answer
T-Square

17. Equipment III: 300 What angles can this triangle be used to make?
See Answer
45 and 90

18. Equipment III: 400
What is this piece of equipment and what is it used for?
See Answer
Electric eraser: Used to erase quickly

19. Equipment III: 500
What is this piece of equipment and what is it used for?
See Answer
Erasing shield: Used to protect lines you don’t want to erase

20. Equipment IV: 100 What angles can this triangle be used to make?
See Answer
30, 60 and 90

21. Equipment IV: 200 Daily Double
How can you distinguish between the Metric scale and the two other scales?
Metric scale can be identified based on the ratios at the end; Architects scale is identified based on fractions at end; Engineers scale is identified based on whole numbers at end
See Question
See Answer

22. Equipment IV: 300 A parallel bar is used to _________________.
See Answer
Draw horizontal lines and support triangles to draw vertical and angled lines

23. Equipment IV: 400
What is this piece of equipment and what is it used for?
See Answer
Sandpaper Pad: used to sharpen compass lead

24. Equipment IV: 500
What is this piece of equipment and what is it used for?
See Answer
House Plan Template: used to draw symbols on floor plans