Download presentation
Presentation is loading. Please wait.
Published byAllison Alexander Modified over 5 years ago
1
Measuring High Energy Electromagnetic Cascades in the Laboratory
2
Detector Layers
4
Particle Identification
5
Electromagnetic Cascade
6
….building a simple electromagnetic cascade model...
7
Radiation length The radiation length is an indicator of how far a particle travels in a medium before losing about 1/3rd of its energy.
8
Critical Energy A high energy electron can lose energy by emitting gamma radiation if it is deflected. Below a certain critical energy in a material, the electron no longer loses energy in this way, it simply ionises atoms or is scattered
9
Interaction Model
10
Population of Electrons in a Cascade
11
Eoriginal = 2t x Ecritical
If the number of particles doubles at each radiation length then there should be 2t particles associated with the peak of the graph If the peak of the graph corresponds to the point where the critical energy is reached then the original energy should be given by: Eoriginal = 2t x Ecritical
12
We aim to: ...use GM tubes arranged to register groups of electrons …look for cascades in lead sheets caused by cosmic rays
14
Experimental Setup
15
Apparatus list 3 GM tubes and their EHT supplies
20 sheets of lead (thickness about 2 mm, size about 20 cm by 20 cm or more) laboratory tripod a three input AND gate a counter that can by driven by the AND gate a reliable clock
16
Setup of the Experiment
17
GM Tube connections to the AND gate
18
Prepare to plot the points as the measurements are taken...
19
Calculating the energy The radiation length for lead is 0. 56cm
Calculating the energy The radiation length for lead is 0.56cm. Find the thickness of lead associated with the peak in the graph and work out how many radiation lengths it represents.
20
The critical energy for electrons in lead is about 7. 6 MeV
The critical energy for electrons in lead is about 7.6 MeV. The maximum in the graph corresponds to the particles having the critical energy If there are 2t particles then the initial energy must be 2t x 7.6 MeV
21
You will have: - a direct measurement of the typical energy of cosmic ray particles passing through the room - made a measurement similar to the ones made many times per second in modern particle detectors
22
If you would now like to try building one of these…...
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.