1. Harmonized text proposal to SDD on UL HARQ Feedback Channel
IEEE Presentation Submission Template (Rev. 9)
Document Number:
IEEE C80216m-09/0366r1
Date Submitted:
Source:
Hwasun Yoo, Sangheon Kim, Hokyu Choi, Heewon Kang
Samsung Electronics Co., Ltd
Roshni Srinivasan, Jong-Kae (JK) Fwu
Intel Corporation
Jinyoung Chun, Sukwoo Lee, Bin-Chul Ihm
LG Electronics
Venue:
Session #59, San Diego, USA
Re:
802.16m SDD
Base Contribution:
None
Purpose:
To be discussed and adopted by TGm for the m SDD
Notice:
This document does not represent the agreed views of the IEEE Working Group or any of its subgroups. It represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material contained herein.
Release:
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE
Patent Policy:
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
< and <
Further information is located at < and < >.

2. Text Proposal for UL ACKCH
<Suggested Remedy#1>
Text Start
UL HARQ Feedback Channel
Multiplexing with other control channels and data channels
[Modify the sentence in line 38, page 107 as follows]
Orthogonal signaling TDM/FDM or TDM/CDM is used to multiplex multiple HARQ feedback channels.
Text End
Related Comments : Comment#521, 542, 547

3. Text Proposal for UL ACKCH
<Suggested Remedy#2>
Text Start
UL HARQ Feedback Channel
PHY structure
[Delete the sentence in line 40, page 107 as follows]
The UL HARQ feedback channel is comprised of three distributed UL feedback mini-tiles (FMT), where the UL FMT is defined as 2 contiguous subcarriers by 6 OFDM symbols. A UL FMT of 6 contiguous subcarriers by 2 OFDM symbols is FFS. One LRU consists of 9 FMTs and can be shared by multiple HARQ feedback channels.
Text End
Related Comments : Comment #519, 543

4. Text Proposal for UL ACKCH
<Suggested Remedy#3>
Text Start
UL HARQ Feedback Channel
PHY structure
[Insert the sentence after line 2, page 108 as follows]
A total resource of 3 distributed 2x6 UL FMTs supports 6 UL HARQ feedback channels. The 2x6 UL FMTs are further divided into UL HARQ mini-tiles (HMT). A UL HARQ mini-tile has a structure of 1 subcarrier by 2 OFDM symbols or 2 subcarriers by 2 OFDM symbols.
Text End
Related Comments : Comment #519, 544