1. CONSTRUCTION MASTERS 1 2 3 4 5 BONUS 6 7 8 9 10 BONUS

2. QUESTION # 1
A B C D

3. QUESTION # 2
A B C D

4. QUESTION # 3
A B C D

5. QUESTION # 4
A B C D

6. QUESTION # 5
A B C D

7. QUESTION # 6
A B C D

8. QUESTION # 7
A B C D

9. QUESTION # 8
A B C D

10. QUESTION # 9
A B C D

11. QUESTION # 10
A B C D

12. QUESTION # 11
A B C D

13. QUESTION # 12
A B C D

14. QUESTION #13
A B C D

15. QUESTION #14
A B C D

16. QUESTION # 15
A B C D

17. QUESTION # 16
A B C D

18. QUESTION # 17
A B C D

19. QUESTION # 18
A B C D

20. QUESTION # 19
A B C D

21. QUESTION # 20
A B C D

22. QUESTION # 21
Change from an accepted, normal, or correct procedure that usually causes an accident is called an __________ act.
A ABNORMALITY
B ALTERATION
C UNSAFE
D HAZARDOUS
A B C D

23. QUESTION # 22
Safety signs with a white background, green panels and white letters are used to give information on where to find important areas such as Material safety data sheet or ( _________ ) stations.
A OSHA
B EYE WASH
C DOCUMENT
D MSDS
A B C D

24. A B C D QUESTION # 23 THIS IS AN EXAMPLE OF WHAT? A – FARM EQUIPMENT
B – HAZARDOUS WORK
C – PROXIMITY WORK
D – CONFINED SPACES
A B C D

25. A B C D QUESTION # 24 THESE TAGS ARE USED FOR: A – FIRE EXTINGUISHERS
B – TAGOUT
C – WARNING LABELS
D – GFCI DANGER
A B C D

26. A B C D QUESTION # 25 NAME THIS DEVICE: A – HARNESS B – SAFETY BELT
C – LANYARD
D – D-RING
A B C D

27. QUESTION #26
A SHOCK ABSORBING LANYARD IS USED IN CONJUCTION WITH A
SAFETY HARNESS TO DO THE FOLLOWING:
A CREATE DECELLERATION TO PREVENT INJURY
B ACCELERATE THE FALL AND PREVENT INJURY
C PREVENT SWING FALL HAZARDS
D PART OF “FALL RESTRAINT” AND STOPS WORKERS JUST
SHORT OF THE AREA WHERE A FALL COULD OCCUR
A B C D

28. QUESTION #27
THE “D” RING ON A SAFETY HARNESS IS LOCATED WHERE?
A FRONT AT BELT BUCKLE
B BETWEEN SHOULDERS ON BACK
C LOWER BACK
D SWIVELS FOR MULTIPLE SETUPS
A B C D

29. A B C D QUESTION #28 WHICH OF THE FOLLOWING IS NOT A TRUE STATEMENT:
A FALLS ARE THE LEADING CAUSE OF DEATH IN
THE WORKPLACE
B MOST FATALITIES OCCUR WHEN WORKERS
FALL FROM OPEN-SIDED FLOORS AND OPENINGS
C FALLS FROM AS LITTLE AS 4 TO 6 FEET CAN
CAUSE DEATH OR SERIOUS INJURY
D OPEN-SIDED FLOORS AND PLATFORMS THAT
ARE MORE THAN 10 FEET HIGH MUST BE GUARDED
A B C D

30. A B C D QUESTION #29 A SAFETY HARNESS & BELT IS PART OF WHAT KIND
OF SYSTEM?
A PERSONAL FALL GUARDING SYSTEM
B PERSONAL FALL PREVENTION SYSTEM
C PERSONAL FALL ARREST SYSTEM
D PERSONAL FALL CATCH SYSTEM
A B C D

31. A B C D QUESTION #30 WHICH MOST ACCURATELY DESCRIBES
A SITE BUILT WOOD GUARD RAIL SYSTEM?
A TOP RAIL 42”, MIDDLE RAIL, TOEBOARD
B TOP RAIL 30”, MIDDLE RAIL
C TOP RAIL 28”, MIDDLE RAIL 16”, TOEBOARD
D TOP RAIL 28”, MIDDLE RAIL 12”
A B C D

32. BONUS # 1
The following are examples of “unsafe conditions” except for which?
A poor housekeeping
B poor lighting
C horseplay
D overcrowding
A B C D

33. BONUS # 2
Prior to using any scaffold, it must first be inspected by:
A the competent person
B the qualified person
C the worker
D the building inspector
A B C D

34. BONUS # 3
Before pulling the pin on a fire extinguisher you should be positioned at least ____ feet from the fire so that burning objects or debris do not scatter and cause the fire to spread.
A 10
B 6
C 5
D 4
A B C D

35. BONUS # 4
One of the most common types of safety grounding systems is the ______.
A Three wire system
B Two wire (+ / -) with ground
C GFCI
D Double Insulated
A B C D

36. A B C D BONUS # 5 THE NATIONAL TESTING AGENCY RESPONSIBLE FOR
EYEGLASS AND PPE SAFETY IS:
A – OSHA
B – NCCER
C – ANSI
D - MSDS
A B C D

37. A B C D BONUS #6 OSHA REQUIRES SOME METHOD OF FALL PROTECTION
IF WORK IS BEING PERFORMED AT OR ABOVE:
A 10 FT.
B 8 FT.
C 6 FT.
D 4 FT.
A B C D

38. INCORRECT

39. CORRECT