1. An Introduction to the Reportable Condition Mapping Tables Jeremiah Sable Consultant, The St. John Group Contractor to APHL

2. Resources for public health reporting What are the Reportable Condition Mapping Tables? The RCMT tables associate reportable conditions with laboratory tests and results that are indicative of those conditions. How are they used? They can be used to filter the output of clinical labs for test results that are of interest to public health. Which conditions do they include? The scope of the RCMTs is all conditions that are: nationally notifiable reportable at the state level reportable in sub-state jurisdictions reportable in US territories

3. What problem do the RCMTs solve? Which test results are of public health interest in which jurisdiction? Clinical Lab Hospitals Medical groups etc. Test results

4. Filtering the output of clinical labs RCMT tables can identify tests and results of public health interest. Clinical Lab Hospitals Medical groups etc. RCMT filter Public health agency Test results

5. Within a public health agency Test results Public health agency STD Foodborne Tb Hepatitis etc... RCMT Routing test results within an agency

6. The problem of non-comparable lab data ARUP labs LabCorp Mayo labs etc.... Quest labs Each lab has its own codes and names for lab tests. There is no consistency across labs. It isnt possible to map the test catalog of each lab to reportable conditions.

7. The problem of non-comparable lab data In order to solve this problem the Regenstrief Institute in Indianapolis created a universal code system for clinical lab tests called LOINC. The first edition of LOINC was released in 1995. Mayo lab sends a lab report to Dr. Jones John Smith 41370 Serum creatinine 1.2 One month later ARUP lab sends Dr. Jones a report on the same patient John Smith 120025 Creatinine, Ser 1.2 mg/dl It is easy for Dr. Jones to look at these two test results and see that the patients creatinine level has not changed over the past month. But Dr. Joness computer cannot tell that the tests or the results were the same.

8. LOINC Clinical labs do not replace their own test names and codes with LOINC. Labs continue to use their own names and codes. When their computers send out lab report messages the test results contain the labs own test names and codes, along with the equivalent LOINC names and codes. LOINC now contains over 45,000 lab tests. It is freely available and has been widely adopted. Federal agencies that exchange lab data must use LOINC to code the tests.

9. LOINC LOINC now contains over 40,000 lab tests. It is freely available and has been widely adopted. Federal agencies that exchange lab data must use LOINC to code the tests. LOINC makes it possible to aggregate and compare lab test data. Clinical labs do not replace their own test names and codes with LOINC. Labs continue to use their own names and codes. When their computers send out lab report messages the test results contain the labs own test names and codes, along with the equivalent LOINC names and codes.

10. The problem of non-comparable lab data ARUP labs LabCorp Mayo labs etc.... Quest labs Each lab has its own codes and names for lab tests. There is no consistency across labs. It isnt possible to map the test catalog of each lab to reportable conditions.

11. LOINC enables data aggregation across labs ARUP labs LabCorp Mayo labs etc.... Quest labs This problem disappears when labs send LOINC codes along with their own codes. It is possible to map LOINC tests to reportable conditions.

12. RCMTs map LOINC tests to reportable conditions Simplified example of RCMT content

13. How does it work? HospitalLab HL7 message

14. How does it work? Patient # 101 102 103 104 105 106 LOINC LOINC test name 2160-0Creatinine : MCnc : Pt : Ser/Plas : Qn : 20570-8Hematocrit : VFr : Pt : Bld : Qn : 2823-3Potassium : SCnc : Pt : Ser/Plas : Qn : 33688-3Yersinia pestis Ag : ACnc : Pt : Isolate : Ord : IF 16533-2Helicobacter pylori Ab : Titr : Pt : Ser : Qn : 31955-8Rubella virus Ag : ACnc : Pt : CSF : Ord : Lab test results in the HL7 message HospitalLab HL7 message

15. How does it work? Patient # 101 102 103 104 105 106 LOINC LOINC test name 2160-0Creatinine : MCnc : Pt : Ser/Plas : Qn : 20570-8Hematocrit : VFr : Pt : Bld : Qn : 2823-3Potassium : SCnc : Pt : Ser/Plas : Qn : 33688-3Yersinia pestis Ag : ACnc : Pt : Isolate : Ord : IF 16533-2Helicobacter pylori Ab : Titr : Pt : Ser : Qn : 31955-8Rubella virus Ag : ACnc : Pt : CSF : Ord : Code Condition 10440 Plague 10200 Rubella Lab test results after processing with RCMT RCMT HospitalLab HL7 message

16. Does this LOINC map to a reportable condition? Many LOINCs are non-specific and cannot be mapped to conditions.

17. Does this LOINC map to a reportable condition? For these non-specific LOINCs the RCMTs contain lists of organisms that cause reportable conditions. These lists contain SNOMED organism codes and names. RCMT virus list

18. What they are and what they arent A pplications – The RCMTs are not applications or software. They are repositories of facts that are used to identify lab tests and results of public health importance. B reakable – The RCMTs contain many thousands of rows. The tables can be subsetted to create program-specific filters. For example an STD program can create an STD subset of the RCMTs. C ase definitions – The RCMTs are not laboratory criteria for diagnosing notifiable conditions and they cannot be used to confirm cases. Some tests, like blood cultures, are diagnostic of current infections. Others, like IgG antibody tests, can only be evaluated in conjunction with other tests because they may indicate past infection. D ecision support – The information in these tables can be used in decision support systems. But since the tables do not contain rules or criteria, they are not sufficient for decision support. E LR – The RCMTs are for electronic lab reporting (ELR). They should be used to filter the output of clinical labs for test results that need to be routed to public health programs. F inished – These tables are not finished or complete. New diseases emerge unpredictably, new lab tests are developed, organism taxonomies are revised, medical knowledge expands, and coding systems like LOINC and SNOMED try to keep up. This is an ongoing project.

19. Reviewing RCMT content The scope of the RCMTs is all reportable conditions in all jurisdictions. This means the content of the tables needs to be reviewed with many CDC programs. Is the list of lab tests for each condition correct? Are there other tests that we should add to LOINC? Are there other organisms (or toxins) that should be added to SNOMED? How will we find out about new tests for each condition?

20. Interacting with Public Health Programs Based on past experience with many state public health labs.... Point of contact One person from each program should be in charge of interactions between the program and the RCMT team. This person will be able to answer many questions without wasting the time of lab and epi SMEs. Pre-review intro Prior to reviewing the RCMTs with each program there should be an introductory meeting with the RCMT team and appropriate people from the program. This will be a high-level overview of the RCMTs and what we need from the program. Follow-through After reviewing the RCMTs with a program new questions will arise and information on the program web site will change. So there will be some ongoing communication between the RCMT and the programs point of contact. Questions and comments about the RCMTs are always welcome.

21. RCMT contact information RCMT Planning Team E-mail: PHINVS@CDC.GOVPHINVS@CDC.GOV RCMT Website (phConnect) : http://www.phconnect.org/group/rcmthttp://www.phconnect.org/group/rcmt