1. HBr, dep. Calc.
E0,Vm+4,Vm+5

2. D1(z-axis) Points for 0 < D1 < 0.001 -for W2 £ W3 W3 W2
Lay:0,Gr:1; “Image plot”; “spectrum”

3. D1(z-axis/out of plane axis)W3
Points for
0 < D1 < 0.001
-for W2 £ W3 W2
Lay:1,Gr:0 ; Contour plot

4. B1 (z-axis) Points for 0 < D1 < 0.001 -for W2 £ W3 W3 W2
Lay:3,Gr:3 ; Image plot

5. B1(z-axis) B1 = 8.84; W2 = 64, W3 = 100 Points for
0 < D1 < 0.001
-for W2 £ W3
W2=49,W3=78, B1=8.41,D1=0.002
from Deperturb. fit analysis: W3
Region close that obtained from
“IR” analysis / See next slide W2
Unrealistic
Region(?)
Lay:2,Gr:2 ; Contour plot

6. NB!: Let´s search the area W3 > 100 and 70 > W2 > 60
Comments:
NB!: Let´s search the area W3 > 100 and 70 > W2 > 60
Judging from the figs. above the W´s must be far away from DEJ´ /2 (=Wmax)values(?): Is that the case?
based on
=>
W2 = 20.6 – and W3 = 48 – 54 cm-1
Judging from the plots above these W´s should give 0 < D1 < !! and B1 = !