1. Volume 2, Issue 2, Pages 240-257 (February 2017)
A Ferrocene-Based Conjugated Oligoelectrolyte Catalyzes Bacterial Electrode Respiration 
Nathan D. Kirchhofer, Zachary D. Rengert, Frederick W. Dahlquist, Thuc-Quyen Nguyen, Guillermo C. Bazan 
Chem 
Volume 2, Issue 2, Pages (February 2017)
DOI: /j.chempr
Copyright © 2017 The Author(s) Terms and Conditions

2. Chem 2017 2, DOI: ( /j.chempr )
Copyright © 2017 The Author(s) Terms and Conditions

3. Figure 1 Molecular Structures (A) DSFO+. (B) DSFO(Me)4.
Chem 2017 2, DOI: ( /j.chempr )
Copyright © 2017 The Author(s) Terms and Conditions

4. Figure 2 CV Traces of DSFO+ and DSFO(Me)4
Solvents and their dielectric constants, ɛ, are indicated. Blue: 10 μM DSFO+ in water with 100 mM (pH 7.4) phosphate buffer supporting electrolyte. Red: 10 μM DSFO(Me)4 in chloroform with 100 mM tetrabutylammonium hexafluorophosphate supporting electrolyte.
Chem 2017 2, DOI: ( /j.chempr )
Copyright © 2017 The Author(s) Terms and Conditions

5. Figure 3
CA Traces from Representative M3C Replicates Operated at E = 0.27 V versus Ag/AgCl with WT, ΔmtrA, and ΔmtrB Strains
At t = 2 hr, M3Cs were injected with (colored traces) 1 μM DSFO+ or (black traces) no DSFO+. Note that DSFO+ was added as a concentrated solution made from the same media used in reactors.
Chem 2017 2, DOI: ( /j.chempr )
Copyright © 2017 The Author(s) Terms and Conditions

6. Figure 4
Average CV Data for M3Cs Containing the Three S. oneidensis MR-1 Strains with and without DSFO+
Black traces represent M3Cs not modified with DSFO+, and red traces represent M3Cs modified with 1 μM DSFO+. Vertical blue dashed lines in the plots indicate the poised potential of E = 0.27 V used for collecting the CA traces (note that this potential was chosen to match the expected formal potential of DSFO+ in lipid).
(A) CV and derivative traces for WT-M3Cs before (t = −1 hr) and after (t = 2 hr) DSFO+ addition.
(B) CV and derivative traces for ΔmtrA-M3Cs before (t = −1 hr) and after (t = 2 hr) DSFO+ addition.
(C) CV and derivative traces for ΔmtrB-M3Cs before (t = −1 hr) and after (t = 2 hr) DSFO+ addition.
Chem 2017 2, DOI: ( /j.chempr )
Copyright © 2017 The Author(s) Terms and Conditions

7. Figure 5
Representative SEM Images of Graphite Electrode Fibers from All M3C Conditions Show Bacterial Adhesion to the Surfaces
(A) WT-M3Cs with 0 μM DSFO+.
(B) WT-M3Cs with 1 μM DSFO+.
(C) ΔmtrA-M3Cs with 0 μM DSFO+.
(D) ΔmtrA-M3Cs with 1 μM DSFO+.
(E) ΔmtrB-M3Cs with 0 μM DSFO+.
(F) ΔmtrB-M3Cs with 1 μM DSFO+.
Scale bars represent 10 μm.
Chem 2017 2, DOI: ( /j.chempr )
Copyright © 2017 The Author(s) Terms and Conditions

8. Scheme 1 Synthetic Approach for the Preparation of DSFO+ and DSFO(Me)4
Chem 2017 2, DOI: ( /j.chempr )
Copyright © 2017 The Author(s) Terms and Conditions