1. doc.: IEEE 802.15-<doc#>
<month year>
doc.: IEEE <doc#>
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: [Comment resolution related to Japanese 950MHz band]
Date Submitted: [July 13, 2010]
Source: [Hiroshi Harada1, Fumihide Kojima1, Ryuhei Funada1, Sum Chin Sean1, Takaaki Hatauchi2, Kazuo Kubo3, Tomonori Sato4, Kentaro Sakamoto5, Aiichiro Kashiwagi6, Takahiro Banno7, Hirohito Nishiyama8]
Company [1NICT, 2Fuji Electric, 3Panasonic, 4Toshiba Toko Meter Systems, 5Tokyo Gas, 6Osaka Gas, 7Toho Gas, 8Mitsubishi Electric Corp.]
Address [13-4, Hikari-no-oka,Yokosuka-shi, Kanagawa , Japan]
Voice:[ ]
FAX: [ ] ]
Re: [TG4g comment resolution]
Abstract: [comment resolutions related to Japanese 950MHz band]
Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
<author>, <company>

2. <month year>
doc.: IEEE <doc#>
Summary
This document describes the proposed resolution on the comments related to Japanese 950MHz band.
The following comments are addressed;
CID#442 and #1779
Slide 2
Page 2
<author>, <company>

3. CID 442
Comment: Is the upper portion of the Japanese band at 950MHz, namely MHz subject to future provisioning, if so it should not be included in the draft at this stage.
Response: Accept in principle
Proposed Resolution: Change to “Japan MHz”
It is in accordance with Japanese regulation as well as with the comment resolution of cid #159
Refer to doc. #
Slide 3

4. CID 1779
Comment: Japanese regulatory update with regard to 950MHz band rules hopefully be included in Annex G.
Response: Accept
Proposed Resolution: Updated Japanese regulatory requirements are provided in doc. # , which is supposed to be inserted in Annex. G
Slide 4