Presentation is loading. Please wait.

Presentation is loading. Please wait.

Landing Gear and Brakes

Similar presentations


Presentation on theme: "Landing Gear and Brakes"— Presentation transcript:

1 Landing Gear and Brakes
Hydraulic System Landing Gear and Brakes

2 Landing Gear Hydraulically Operated Electrically Powered
Tricycle Landing Gear Air-Oil Strut Type (Oleo) Fully Retractable Nose Main

3 Limitations Retraction / Extension 6-7 Seconds
VLO Retracting KIAS VLO Extending KIAS VLE KIAS

4 Hydraulics An Oildyne Reversible Hydraulic Pump Reservoir
Hydraulic Fluid MIL-H-5606 Do Not Mix Types

5 Hydraulics Gear Extension
Drive gear Driven gear Shuttle valve Actuators Double acting Unbalance Linear Gear Extension

6 Hydraulics Gear Retraction
Drive gear Driven gear Shuttle valve Actuators Double acting Unbalance Linear

7 Hydraulics Pressure switch Pressure control Off 1800 +/- 100 PSI
On /- 100 PSI Pressure control High (2400 +/- 200 PSI) Low (600 +/- 200 PSI) Thermal relief (3000 PSI)

8 Normal Operation Hydraulic
Down Delivered Pressure psi Down lock switches turn pump off Up psi Hydraulic pressure holds gear up Pressure switch turns pump off

9 Hydraulics Emergency Gear Extension Knob
Checklist - airspeed reduce below 100 kts Gravity will allow the gear to extend

10 Gear Warning Gear Warning Annunciator Light Conditions In Transit
Down Lock Switches Disengaged Up Lock Switches Disengaged

11 Gear Warning Gear Warning Horn Conditions
Guard against gear up landing Conditions Squat Switch Closed (airborne) Gear Selector Up Down Lock Switches Open (Gear Up) Throttle Switch (14”) or Flap Switch (16o)

12 Gear Warning Gear Warning Conditions What prevents Gear Up On Ground?
Down Lock Switches Closed (Down & Locked) Squat Switch Open (Ground) Gear Selector Switch Up

13 Hydraulic Pump Control
Gear Selector Switch -Up Hydraulic Pump Up Relay Hydraulic Pressure Switch (Below 1400 PSI) Squat Switch Closed (Airborne)

14 Hydraulic Pump Control
Gear Selector Switch - Down Hydraulic Pump Down Relay

15 Hydraulic Pump Power Hydraulic Pump - Up Relay Pressure Switch will turn motor Off at 1800 psi + or psi

16 Hydraulic Pump Power Hydraulic Pump - Down Relay
Down Lock Switches turns off motor when all three engaged To downlock switches

17 WHEEL BRAKES

18 Purpose of Brake System
Provide sufficient friction to stop the airplane on landing (if required) Hold the airplane during engine run-up Absorb kinetic energy of the wheel and convert it into heat and… dissipate the resultant heat as efficiently and quickly as possible

19 Brake System Reservoir Master Cylinders Fluid Line Parking Brake Valve
MIL-H-5606 Do Not Mix Types Master Cylinders Fluid Line Parking Brake Valve Brake Assembly

20 Brake System Brake Master Cylinders Toe Brakes Parking Brake

21 Brake System Brake lines Brake disc Brake housing Cleveland brakes
Single disc Heavy duty Brake housing Double puck Brake linings (metallic) Cleveland brakes

22 QUIZ What turns off the electrical powered reversible hydraulic pump when the landing gear is retracted? A. The electrical limit uplock switches when all three engage B. The hydraulically activated pressure switch

23 end


Download ppt "Landing Gear and Brakes"

Similar presentations


Ads by Google