1. Rinker Materials Littleton, CO
Plant Representatives:
Andrew Hartmann
Luis Melendez
Good morning everybody. My name is Andrew Hartmann and I work for Rinker materials in Littleton, CO.

2. The Problem Header chains under suspended load
Employee had to use rebar to reach under
Inefficient and exposed employees to hazards
Our problem dealt with our strong back and employees working around a suspended load. When the strong back came down the chains would be under a suspended load. Employees were using a piece of bent rebar to pull the chains out as the strongback came down. Once the strong back was resting on the header the employee would hook it up. While this worked it was inefficient and the employees still had to work around a suspended load. Exposing them to a potential hazard.

3. Our Solution Developed by safety coordinator Miguel
Eliminates the suspended load
Provides room for employees to work
Prevents strong back from resting on header
After see the employees struggle with the chains, our safety coordinator came up with the idea to attach legs to the strongback. Once the legs were attached it eliminated the suspended load. It also gave the employees more room to hook the chains up to0 the header. The legs can be moved depending on what we are producing so that they are never in the way.

4. Cost 4”x 4”x 1 4 ” square tubing About 180$ for 20ft 2 Hours of labor
Simple and easy to construct
The supports are made from ¼ inch thick 4 x 4 square tubing. The tubing we used was actually scrap that had been laying around our shop, however you can get 20 feet of it for about 180$. It took our maintenance guy Orlando about 2 hours to measure, cut and install the legs. These simple support legs

5. Questions/Comments Thank You!
Thank you for allowing me this opportunity to present our entry into the ACPA chairman safety award. Does anybody have any questions or comments.