1. xSpider DEMO – Simultaneous Factor and Parallel Sources
Instructional animated presentation

2. During operational state „Normal“ parallel TRANSFORMERS are connected
Parallel Generators
Parallel Transformers
FILE: Default State
During operational state „Normal“ parallel TRANSFORMERS are connected
Click for next slide

3. Parallel Transformers
Because of more sources working parallel, network is evaluated as meshed network (regardless that entire load part is radial network)
Click for next slide

4. In network nodes are SET Simultaneous Factors
Click for next slide

5. Because of connected parallel transformers, Simultaneous factors are IGNORED
Click for next slide

6. Sources are OVERLOADED
FILE: Default State
Sources are OVERLOADED
Click for next slide

7. Switch to file „Virtual Sources“
Click for next slide

8. Default Sources
Rated power of virtual source = TOTAL rated power of DEFAULT parallel sources
Click for next slide

9. Network is RADIAL
Click for next slide

10. In network nodes are SET Simultaneous Factors
Click for next slide

11. Because of ONE virtual source, Simultaneous factors will NOT be ignored
Click for next slide

12. The same concept shall be used to replace generatorsOK
Source is not overloaded, because algorithm takes Simultaneous factors into account
The same concept shall be used to replace generators
Click for END

13. More information available at the address:
Eaton Industries (Austria) GmbH
Scheydgasse 42, A-1215 Wien, Austria
Tel.: