1. Fuel, Water Systems, Hardware, Seating
Tim Hayman

2. S3 Digital Bilge Switch
Incorporates Proprietary Electronic Sensing Technology
Compact & Robust
Allows for a high degree of flexibility in mounting
Pump side
Floor of boat
Stringer side (eliminates costly brackets used today)
No moving components to break or jam
Fully potted electronics…eliminates corrosion failures
Can be Mounted to Attwood and Competitive Pumps
Industry leading 5 Year Warranty!
Max Width: 3.03"
Max Depth: 1.66"
Max Height: 2.72"

3. Plastic Thru-Hulls Stainless-Clad
Stainless Steel look at a fraction of the cost
Corrosion Resistant
Stainless Steel Cap
Engineered Composite body – 30% Glass-Filled PolyPro
Improved Installation
Assembly features that allow for “single-operator” installation

4. Turbo In-Line Blowers Advanced blade design
Significant reduction in RPM’s - w/ same output
5a vs. 8a Breaker
Reduced noise and vibration – longer life
Engineered Plastic Housing
Up to 4x stronger than previous design
Resists Deformation and Blade Interference
Turbo 4000 Series II available in 12v and 24v

5. Fuel Systems 3, 6 and 12 Gallon Fuel Tanks
Meets EPA requirements for 2010 & 2011
2010 Requires Audible Click, Tethered Cap and Self-Sealing up to Min 5PSI
2011 Requires Low-Permeation Tank Construction & Primer Bulb
3 & 6 Gal Tanks Available in Gauged and Non-Gauged Options
12 Gal Tank Available only in Non-Gauged Option

6. Fuel Systems Fuel Line Kits
Meet 2009 and 2010 EPA requirements for Low Permeation
EPA Certified USCG Type B1-15
Meets and labeling requirements
Meets 15 grams per meter squared per day emission requirements
Fittings have been upgraded to progressive multi barb for an extremely dependable connection at the end fitting
Clamps have been upgraded to overlapping heavy duty clamps for dependability and strength

7. Deck Fills Key Features
Integrated Teflon screen eliminates penetration of water into fuel system
Engineered body strength resists breakage
Meets ISO requirement for venting area (95mm2) Required for CE certification
Standardized hole pattern allows for interchangeability

8. Carbon Canisters Functional Requirements
Liquid water must not enter the canister
Liquid fuel must not enter the canister
The canister must be mounted above the top level of the fuel tank
“Marine Grade” carbon is required
The proposed ABYC specification requires that the vent line must be “self-draining”
Two Canisters can be “daisy chained” 1L
1.5L 2L 3L 4L

9. Seating Centric II Larger Seating Surface
Seat Pan designed for proper water drainage
Folds flat for a cleaner look
Available in SAS & Non-SAS, Locking & Unlocking options
Aergo
Designed for maximum comfort in any seating position
Includes 4-G Mesh SAS Suspension
Includes Flip-Up Bolster

10. Canvas Universal Covers Premium Boat Cover – 300 Denier Poly
Heavy Duty, Water-Resistant
1” Poly-Web Travel Tie Down Kit Included
Standard Boat Cover – 150 Denier Poly
Jon Boat & PWC Cover
Strong, Color-Fast, Water-Resistant
Braided Rope Tie-Downs
Bimini Tops
Introducing Heavy Duty 1-1/4” Square Tube Framework for Pontoons
Anodized Aluminum Finish
Rugged Construction
High Quality, Long Lasting