1. ZCS 6.5mm Cannulated Workshop1 2 3 4 6 5 8 7 9 10 11 12 17 13 18 14 19 20 15 16 21
ZCS 6.5mm Cannulated Workshop
Cat. No Description
Cannulated Hex Driver Use With 6.5/7.0/7.5mm Screws
Depth Gauge
/7.0/7.5mm Percutaneous Screw Guide
mm Percutaneous Drill Sleeve
Adjustable Pin Parallel Guide
mm Percutaneous Guide Pin Sleeve
QC Hex Head Driver Use with 6.5/7.0/7.5mm Screws
mm Trocar
mm QC Cannulated Drill
mm x 9IN Smooth Shaft Drill Point Guide Pin (3)
mm x 9IN Partial Thread Tip Guide Pin (4)
mm x 100mm Cannulated Screw (x2)
mm x 95mm Cannulated Screw (x2)
mm x 90mm Cannulated Screw (x2)
mm x 85mm Cannulated Screw (x2)
mm x 80mm Cannulated Screw (x2)
mm x 75mm Cannulated Screw (x2)
mm x 70mm Cannulated Screw (x2)
mm x 60mm Cannulated Screw (x2)
mm x 55mm Cannulated Screw (x2)
mm x 50mm Cannulated Screw (x2)
* Stylet (Shared Between Two Sets)
*sizes of screws vary