1. FIRELEC Migration Solution
Don't let wiring costs prevent you from upgrading a PROVOX™ 10-Series to a DeltaV™ system
This document is the property of FIRELEC. No copy, even partial, allowed without prior writen authorization.

2. Hardware to be removed FMS-PVXDM-DV-1 PROVOX™ Highway to be removed
Primary PROVOX™ Highway
Secondary PROVOX™ Highway
PROVOX™ Controller
PROVOX™ controller to be removed
File : DM6003
6 I/O cards
19’’ - 4U
The file is removed including all the 10-Series I/O cards, the power supply and
communication cards
Process I/Os stay in place in existing cable trays, they have to be rewired on the ADP-DM removable connectors
Process I/Os

3. PROVOX™ 10-Series > DeltaV™ With ADP-DM adapters
FMS-PVXDM-DV-1
PROVOX™ 10-Series > DeltaV™ With ADP-DM adapters
Process I/Os
You just have to rewire process I/Os from the existing PROVOX™ terminal blocks to the ADP-DM removable connectors
(on the same labels)
And remove the entire old PROVOX™ 10-Series DM6003 file (4U)

4. PROVOX™ 10-Series > DeltaV™ With ADP-DM adapters
FMS-PVXDM-DV-1
PROVOX™ 10-Series > DeltaV™ With ADP-DM adapters
Connect the ADP-DM to the new DeltaV™ system using suitable FIRELEC cables
Install the new FIRELEC BC file with ADP-DM (3U)
Connect back the removable connectors wired with the process I/Os to the ADP-DM
The remaining space (1U) allows to install the cable tray for system cables
No existing PROVOX™ hardware is kept (I/O File – I/O card)
Existing PROVOX™ files are replaced by new FIRELEC BC which are electrically and mechanically fully compatible
Existing wiring is kept in place
Process I/Os

5. Hardware to be installed
FMS-PVXDM-DV-1
Hardware to be installed
Primary DeltaV™ Highway
The new DeltaV™ architecture
Secondary DeltaV™ Highway
Cntrl PS
I/O1
I/O2
I/O3
I/O4
I/O5
I/O6
I/O7
I/O8
New FIRELEC I/O cables are installed between ADP-DM and DeltaV™ I/O cards
File : BC-11008
(6 I/O cards - 19’’ - 3U) +
1U system cable tray
ADP-DM are installed in the FIRELEC BC file, replacing the old PROVOX™ 10-Series DM6003 file
Process I/Os

6. Advantages FMS-PVXDM-DV-1 The main advantages of the ADP-DM adapters
for PROVOX™ 10-Series migration are as follow :
The existing I/O wiring is kept in place (same terminals, same labels and same electrical characteristics).
The existing I/O wiring is simply disconnected from the DM 10-Series PROVOX™ front terminal block and then reconnected to the ADP-DM without any modification of the existing wiring (same labels and same electrical characteristics).
The existing loop drawings are slightly affected, allowing a minor and quick update of them.
Maintenance procedures are virtually unchanged.