1. The Smart Valve
Title Page

2. What is The Smart Valve?
The Smart Valve is a patented, USA made device that is installed on the user side of your incoming water line that creates a steady back pressure through your water meter. This creates a steady flow through your meter, so now the meter will no longer over-spin and you no longer will be charged for pockets of air that pass through the meter! 99% of meters on the market do not recognize the difference between water and air, so they count BOTH as volume! So the Smart Valve is correcting a mistake your meter is making by charging you for both!

3. The Smart Valve USA Made, 10 year warranty, Patented
90 day money back guarantee
Constructed of high grade materials
Simple install, less than 1 hour for residential, could be as little as 1 hour for commercial
Fast Return on Investment, most commercial less than one year, typically 2-3 years residential
Adjustable to each location's situation.  Can be adjusted when things change (ex. 400 unit apartment complex is 50% occupied, then becomes 95% occupied using more water and needing more pressure)
Over 4,000 units sold, about 5 returned to date (NONE returned that were sold by Capital Distribution)
Installed on user side of meter, after any back flow preventer but before any other equipment (such as a pressure reducing valve, or booster system)

4. The Smart Valve: Installation Pictures

5. Potential Savings Based on the Situation:
4” Incoming Water Line
Average $4,000 per month in water and sewer usage charges
Operating under the assumption of a 5% average increase in water and sewer usage costs over the next 10 years (which has been the case since 2010)
98% of users save at least 10%
70% of users save at least 20%
Average user saves 20%, results as high as 37%

6. Potential Savings for (Insert Property)
* Yellow, bolded area is our most common result

7. Summing up the Return on Investment
Summing up the Return on Investment *Based on $9,000 MSRP of a 4” Smart Valve and cost increases of water and sewer moving forward
At 20% savings (the average savings amount) the Return on Investment is less than one year (11.5 months) and over $120,000 total savings while the product is in warranty (10 years).
At 37% savings (our highest to date) you would have a return on investment of about 6 months, and save over $223,500 in ten years.
At 10% savings (98% save at least this much) your ROI is about 23 months, and over $60,000 while in warranty
If you only saved 5% (which would be the lowest ever, less than 2% see single digit savings) your ROI is less than 4 years with over $30,000 saved while in warranty.