1. Safety Moments Topic: Handling Waste
A Safety Moment is a brief safety talk about a specific subject at the beginning of a meeting or shift. Also known as safety minutes or safety chats, these talks can be done in a variety of ways, but are typically a brief (2-5 minute) discussion on a safety related topic. They can cover a variety of safety topics and remind employees of the importance of being safe; at work, at home and in all aspects of our lives.
Use one slide per Safety Moment (unless specified).

2. Waste determinations
The best time to think about waste disposal is BEFORE you start the experiment*. Some questions to ask yourself during the planning process:
What wastes will I generate and what are their characteristics? 
How will I store the wastes after they are generated and prior to disposal?
Where will you store the wastes?
How long will you store the waste?  
How will you get rid of the wastes? (hazardous or non?)
Additional information on waste handling, storage and disposal can be received through proper training: training/
*document your waste collection and disposal procedures in the SOP

3. Liquid hazardous waste
General Rules for Managing Liquid Hazardous Wastes
Containers must be closed at all times except when physically adding waste
Containers must be labelled with all chemical constituents (and their approximate % by volume), including water
Segregate liquid waste from solid wastes
Store small (<1 gal) containers in a secondary containment (tray or tub)
Glass bottles on the floor must be stored in a secondary containment (tray or tub)
Leave adequate headspace in liquid containers (~1” is sufficient for a 4L container; leave more or less depending on the size of your waste container)
Accumulate any Mercury-containing liquids or compounds in their own container
4-liter glass bottles, 10- and 20-liter plastic carboys, and 20-liter metal cans are available at no charge from EH&S by calling

4. Flammable Liquids and Solvent Wastes
Segregate from oxidizers within SAA (separate secondary containment)
Do not mix halogenated solvent waste with non-halogenated waste
For small quantities (<5 gallons), accumulate in glass bottles
For larger quantities (>5 gallons), accumulate in metal cans
Ensure installed grounding straps are attached when pouring into waste containers
Ensure area free of heat or open flame

5. Corrosive Liquid Wastes
Segregate acidic wastes from alkaline wastes within SAA (separate secondary containment)
For small quantities (<5 gallons), accumulate in glass bottles
For larger quantities (>5 gallons), accumulate in plastic carboys
Never accumulate corrosive liquids in a metal container
Always accumulate hydrofluoric acid (“HF”) in a plastic container; NEVER USE GLASS FOR HYDROFLUORIC ACID

6. Solid hazardous waste
General Rules for Managing Solid Hazardous Wastes
Containers must be closed at all times except when physically adding waste
Containers must be labelled with all chemical constituents or contaminants
Segregate liquid waste from solid waste
Do not dispose of liquid-containing vials in the same container as solid waste
Identify all chemical hazards on hazardous waste labels
Accumulate any mercury-containing compounds or mercury- contaminated solid wastes in a separate container
Do not dispose of clean lab ware or broken glass as a solid hazardous waste
5-gallon plastic buckets and 30-gallon fiberboard drums(with plastic liner) for solid waste accumulation are available from EH&S by calling

7. Clean glassware policy (slide 1 of 2)
These laboratory items may be disposed of as “Clean Lab Ware,” provided that the item is clean and is not  contaminated with hazardous chemicals, radiological materials, or biohazardous materials.
Lab glassware (empty bottles, beakers, graduated cylinders, flasks, pipettes, etc.)
Lab plastic wares (empty product containers, petri dishes, pipette tips, weighing boats, etc.)
Empty vials (including conical tubes, test tubes, centrifuge tubes, etc.)
Clean, uncontaminated gloves
Sharp materials, such as glass slides, broken glassware, pipettes, etc. but DOES NOT INCLUDE METAL NEEDLES, SCALPELS, OR RAZOR BLADES

8. Clean glassware policy (slide 2 of 2)
The following items are not permitted to be disposed of in the lab’s Clean Lab Ware box.
Any item contaminated with a hazardous chemical, radiological, or biohazardous material
Needles, scalpels, razor blades (must be disposed of in a rigid plastic outer container)
Any item marked with a Biohazard symbol
Red bags (reserved solely for biohazardous wastes)
Used tissue cultures
Labs are directed to line a cardboard box with a plastic garbage bag and label the outside of the box “Clean Lab Ware.” Once full, lab workers should seal the box using tape and dispose of the box as follows:
Labs not in the Health Science Center: deliver the closed and sealed box to the building’s dumpster.

9. ChemSwap for surplus chemicals