1. New MB 500 GNSS OEM Board

2. Strong R&D: History of Innovation
MB 500 Dual-Frequency GPS+GLONASS+SBAS with BLADE (2008)
DG14 First L1 GPS+SBAS board with RTK (2002)
G8 First L1 GPS board with $125 (2001)
GG12 First GPS+GLONASS FAA-Certifiable Board (1999)
Z-Eurocard First Dual-Frequency GPS board under $10k (1998)
GG24 First GPS+GLONASS board 1996
G12 First Ashtech OEM board (1996)
Z-12 First Z-Tracking GPS receiver (1992)
Good slide

3. Multi-constellation GNSS board
Introducing MB 500
100 mm
80 mm
Multi-constellation GNSS board
L1 or L1/L2 (L2C) GPS+GLONASS+SBAS
Up to Centimeter real-time accuracy

4. MB 500 Specifications
Multi-constellation Dual Frequency GNSS Board:
GPS L1 C/A L1/L2 P-code/L2C, L1/L2 full wavelength carrier
GLONASS L1 C/A, L2 C/A or P-code, L1/L2 full wavelength carrier
SBAS: code & carrier (WAAS/EGNOS/MSAS)
Fully independent Code and Phase measurements
Available from single frequency GPS+GLONASS version up to a full featured version by firmware key activation
RTK Base
RTCM-2.3: Types 1, 3, 9, 16, 18, 19, 20, 21, 22, 23, 24, 31, 32, 34, 36
RTCM-3.1: Types 1001 to 1013 ,1019, 1020, 1029, 1033
CMR: Types 0, 1, 2, 3 ; CMR+: Type 0, 3
ATOM™ (Magellan Professional proprietary format)
Moving base operation
New

5. New MB 500 Specifications RTK Rover BLADE technology
Up to 10 Hz Synchronized RTK & up to 20 Hz Fast RTK
RTCM-2.3: Types 1, 3, 9, 16, 18, 19, 20, 21, 22, 23, 24, 31, 32, 34, 36, 59 (FKP)
RTCM-3.1: Types 1001 to 1017, 1019, 1020, 1029 to 1033
CMR: Types 0, 1, 2, 3 ; CMR+: Type 0, 3
ATOM, DBEN an LRK (Magellan Professional proprietary format)
Networks: VRS, FKP, MAC
RTK with moving base operation
Heading and pitch or roll determination (against another board or sensor)
New

6. MB 500 Environmental Specifications
Operating Temp: -30°C to +70°C (-22°F to 158°F)
Storage Temp: -40°C to +85°C (-40°F to 185°F)
Power consumption: 1.9W (GPS), 2.4W (GPS+GLONASS)
Input voltage: 3.3 to 9V DC
Antenna power: +5 VDC (±10%),
Size: 100 x 80 x 13 mm (3.9 x 3.1 x 0.5 in)
I/O: 30 pins SAMTEC connector
Antenna and Reference Clock Input signal: female MMCX straight connector
Humidity: 95% non-condensing
Shock: MIL-STD 810F, Fig (40g, 11ms)
Vibration: MIL-STD 810F, Fig C-17
Low Power Consumption!
Harsh Environment-Proof!

7. MB 500 Technology and Performance
Instant-RTK™ and LRK™: Fast initialization and centimeter accuracy at long range
Typically 2 seconds initialization for baselines < 20Km
99.9% reliability
Initialization range > 40Km
Flying RTK™ accuracy at long range
Decimeter accuracy up to 1000 Km

8. MB 500 Accuracy Specifications
RTK
Fixed RTK
Horizontal (1 sigma): 1cm +1ppm
Vertical (1 sigma): 2cm + 1ppm
Flying RTK™
Horizontal (CEP): 5cm +1ppm after 3minutes of convergence
Vertical (1 sigma): 10cm + 1ppm
Heading Pitch/Roll
Heading (1 sigma) : 0.2°/ Baseline (m)
Pitch/Roll (1 sigma) : 0.4°/ Baseline (m)

9. MB 500 has been designed for various applications such as:
MB 500 Applications
MB 500 has been designed for various applications such as:
Survey
Offshore Marine dynamic positioning
Tail buoy seismic tracking
Unmanned Autonomous Aircraft
Container tracking
Machine control
Opencast Mining
Agriculture
Etc

10. BLADE technology inside for…
Optimal Use of SBAS and GLONASS ranging signals to strengthen the GPS solution allowing reliable RTK with GPS+SBAS or GPS+GLONASS+SBAS receivers
HDG
DT/BT
Heading with baseline auto calibration
Relative Positioning (RTK with moving base)
Strong multi-path mitigation

11. BLADE technology inside for…
Flying RTK
Faster time to a decimeter accurate solution up to 1000 km baseline
The L-Band alternative
Long Range RTK
Centimeter positioning over baselines up to 40km

12. PRODUCT DESCRIPTION ProMark 500 GNSS System ProMark 500 Sensor
Multi-Constellation, dual-frequency receiver
BLADE™ Technology
MobileMapper CX
Windows CE.Net ruggedized data collector
Sub-meter hand-held GNSS receiver
FAST Survey
Complete suite of field applications
Real-time and raw data collection
GNSS Solutions
Real-time and raw data processing
Network solutions

13. PRODUCT DESCRIPTION ProMark 500 Sensor
L1 & L2 tracking of GPS, GLONASS and SBAS
BLADE™ Technology
Real-Time precision
SBAS Horizontal: < 3 m (10 ft)
DGPS Horizontal: < 0.8 m (2.62 ft)
Real-Time Kinematic
Horizontal: 10 mm (0.033 ft) + 1 ppm
Vertical: 20 mm (0.065 ft) + 1 ppm
Post-Processed precision
Static, Rapid Static
Horizontal: 5 mm (0.016 ft) ppm
Vertical: 10 mm (0.033 ft) + 1 ppm
Kinematic
24 GPS channels, 24 GLONASS channels and 2 SBAS channels

14. PRODUCT DESCRIPTION ProMark 500 Sensor Initializations
Typically 2 seconds for baselines < 20 km (12.4 miles)
Range typically to 40 km (24.8 miles)
Data characteristics
Update rates to 10 Hz
Recording intervals 0.1 to 999 seconds
128 MB internal memory (~83 MB available for data)
Real-time support for:
RTCM 3.1
RTCM 2.3
Magellan ATOM
CMR/CMR +
NMEA 0183
NTRIP and DIP connections

15. PRODUCT DESCRIPTION ProMark 500 Sensor Physical Characteristics
Size: ~ 23 x 19 x 8 cm (~ 9 x 7 x 3 in)
Weight: 1.4 kg (3.1 lb)
OLED Monitoring screen
RS232, RS422, USB, Bluetooth
PPS & External event
Operating temperatures: -30° to +55°C (-22° to +131°F)
Storage temperatures: -40° to +70°C (-40° to +158°F)
Shock: ETS , 2 m (6.56 ft) pole drop
Vibration: EN60945
LiIon battery: 7.4V mAh, ~ 6 20°C
OLED=Organic Light Emitting Diode

16. 5/8” x 11 Threaded Connector
PRODUCT DESCRIPTION
Bottom of Sensor
Comm. Module
USB
UHF Antenna Connector
9-Pin Fisher
TNC
GSM Antenna Connector
GSM Modem
SMA
Under Comm. Module
Battery Cover
RS232/422
Power port will accept 9 – 28 volts.
Port A is the RS232 connection
Port C is the Bluetooth connection
Port D is the Internal Radio
Port E is the GSM Modem
External Power
7-Pin Fisher
3-Pin Fisher
Bluetooth Antenna
5/8” x 11 Threaded Connector

17. PRODUCT DESCRIPTION Interface Buttons and Indicator LED Power LED
Scroll
Log
Special button combinations:
With the PM500 off, pressing the Power, Log and Scroll buttons simultaneously for a few seconds will restore all the factory settings. Always use this combination after changing the radio module which will allow the receiver to recognize the new module.
With the PM500 off and a USB key connected, pressing the Power and Scroll buttons simultaneously for a few seconds will cause the PM500 to start a firmware upload process. If there is no USB key connected or the key does not contain a firmware update, then the process will abort after a few seconds.
Power On/Off

18. PRODUCT DESCRIPTION Real-time Communications
ConfRadio: New software utility for programming Magellan radios.
U-Link Transmitter is compatible with PDL Rovers
U-Link Transmitter configuration is stored in the PM500

19. PRODUCT DESCRIPTION LED Display Screens Boot Screen System Status
Memory Statistics
System Information
File Management
Displays will turn off the backlight after approximately one minute of inactivity. When the backlight is off, a short press of the Scroll button will turn the backlight on.

20. PROFLEX 500

21. PROFLEX 500 GNSS Characteristics Real-Time Accuracy Memory 75 Channels
GPS L1 C/A, L1/L2 P-code, L2C
GLN L1 C/A, L2 C/A, L2P
SBAS Code and Carrier (WAAS, EGNOS, MSAS)
Up to 20 Hz output (raw data and position)
Real-Time Accuracy
RTK - 1 cm + 1 ppm (Horizontal)
SDGPS m (Horizontal)
Flying RTK - 20 cm + 1 ppm (Horizontal)
Memory
128 MB Internal - (~ 83 MB available for data logging)
Expandable via USB

22. RECEIVER REVIEW Environmental Characteristics Monitoring OLED Display
Operating temperature: -30ºC to +65ºC
Humidity: 100% condensing
IP67 waterproof and dustproof as described in EN60945
Salt mist as defined in EN60945
Shock: MIL-STD 810F
Vibration: MIL-STD 810F
Monitoring OLED Display
Internal battery acts as UPS
ATOM, RTCM 3.1, CMR/CMR+, RTCM 2.3
GSM/GPRS/EDGE Class 10 Quad band modem
U-Link and Pacific Crest Tx and Rx options
Backpack configuration

23. V2 FIRMWARE ENHANCEMENTS
GPS L2C Support
L1 (by default) , L2 in option
SDGPS mode (SBAS Differential)
Moving Base option
Data streaming via Ethernet
Data download from the Internet
Configuration and control via Internet
Web Interface
Firmware upgrade via Internet
New OPTIONs introduced

24. ETHERNET FUNCTIONS Web controller – Server Access Open web browser
Indicate the IP address in the URL