1. PPT12: Shape Modification Tools
CAP 6736
Geometric Modeling
PPT12: Shape Modification Tools
PPT and video are due no later than April 12
Submit to:
This template file is just an outline of the presentation
that you need to complete. Additional pages may
be necessary to fully explore the topic above.
Each page should contain adequate text as well
as illustrations. You are free to use all publicly
available information (text as well as graphics) as long as
the sources are properly acknowledged.

2. Team members’ contributions
Member [name]:

3. Part I: Technical details
For this part you will need an equation editor. You may use:
MS equation editor,
MathType,
LaTeX, or
Handwritten equations if all else fails

4. Control Point Repositioning
Suggested content:
control point repositioning
move one point
shape function

5. Control Point Repositioning
Suggested content:
control point repositioning
move one point
examples

6. Control Point Repositioning
Suggested content:
control point repositioning
move two points
examples

7. Control Point Repositioning
Suggested content:
control point repositioning for surfaces
examples

8. Weight Modification Suggested content: weight changes for curves
one weight
examples

9. Weight Modification Suggested content: weight changes for curves
two weights
examples

10. Weight Modification Suggested content: weight changes for surfaces
examples

11. Warping Suggested content: curve warping warp function
control point repositioning

12. Warping
Suggested content:
curve warping
warp process

13. Warping
Suggested content:
curve warping
examples

14. Warping Examples
Suggested content:
curve warping
examples

15. Warping
Suggested content:
surface warping
region warp

16. Warping
Suggested content:
surface warping
region warp

17. Warping
Suggested content:
surface warping
skeletal warp

18. Warping Examples Suggested content: surface warping
skeletal warp examples

19. Flattening Suggested content: curve flattening
the process of control point repositioning

20. Flattening
Suggested content:
curve flattening
examples

21. Flattening
Suggested content:
surface flattening
examples

22. Bending Suggested content: curve bending
bending with respect to a base curve

23. Bending
Suggested content:
curve bending
examples

24. Bending Suggested content: surface bending
bending with respect to a base surface

25. Bending
Suggested content:
surface bending
examples

26. Part II: Design examples

27. Design Examples Suggested content:
Add design examples: images and/or videos
Give credit to the designers

28. Part III: GM lab
For this part of the assignment you may use an existing system,
such as Blender, or write the code and visualize the result
using graphics tools like Processing.

29. Geometric Modeling Lab
Suggested project:
Design shapes using curve and surface shaping tools