1. Graphics Quiz!

2. The person who gets the most answers correct will get a prize!
Lets see how well you’ve been revising! Write your name at the top then Q1 – 25 at the left hand side of your piece of paper.
Olaf
The person who gets the most answers correct will get a prize!

3. Name the following drawing symbols…

4. Q1.

5. Q2.

6. Q3.

7. Q4.

8. Q5.

9. Q6.

10. Q7.

11. Q8.

12. Q9.

13. Q10.

14. Identify the following lines…

15. Q11.

16. Q12.

17. Q13.

18. Q14.

19. Q15. What type of dimensioning is this?

20. Q16. What type of dimensioning is this?

21. Q17. What is a tone?

22. Q18. Can you name two feelings that are associated with the colour Brown?

23. Q19. Can you name two feelings that are associated with the colour Yellow?

24. Q20. Can you suggest a suitable scale for a floor plan?

25. Q21. Can you suggest a suitable scale for a location plan?

26. Q22. Can you name two advantages of using CAD over manual drawing?

27. Q23. Can you name two other pictorial views other than the one shown below?

28. Q24. Can you name the CAD command shown below?

29. Q25. Can you name the CAD command shown below?

30. Now swap with another person!

31. 1. Washbasin!

32. Q2. Concrete!

33. Q3. Wood Sawn!

34. Q4. Window Hinged at top!

35. Q5. Springs!

36. Q6. Existing Tree – to be removed!

37. Q7. WC!

38. Q8. Switch!

39. Q9. Heated Towel Rail!

40. Q10. Drainage!

41. Q11. Hidden Detail Line!

42. Q12. Cutting Plane!

43. Q13. Fold Line!

44. Q14. Outline Solid!

45. Q15. Parallel Dimensioning!

46. Q16. Chain Dimensioning!

47. Q17. A tone of colour shows how strong or weak a colour is !

48. Q18. Any of above.

49. Q19. Any of above.

50. Q20. 1:50 or 1:100!

51. Q21. 1:1250 or 1:2500!

52. Q22. Any two from below: • Library of common parts can be used to reduce time • Ease of editing • Ease of creating new designs from existing designs • Less physical storage space required • Portable files easier and quicker to transfer by digital means. • Accuracy • Ability to use in different scenarios (use as base for 3D models) • Used for simulations • Simultaneous working

53. Q23. Any two from below: •. Isometric •. Oblique •. Planometric •
Q23. Any two from below: • Isometric • Oblique • Planometric • One Point Perspective.

54. Q24. Extrude Subtract!

55. Q25. Fillet Command!