1. How to Register & Enter Data
Step-by-step instructions on how to register at
Step-by-step instructions on how to insert your monitoring data
If you have any further questions after viewing these instructions, us at

2. 1 2 3 To Register at www.WorldWaterMonitoringDay.org:
Click on the “Participate” tab located in the top navigation bar.
Click on the “Log in to Database” tab on the left-hand navigation column
OR, you can click on “Register yourself and your site” (located in Step 3).

3. 4
Enter your address and password if you have already created an account.
If you are registering for the FIRST time, then click the blue “Sign Up!” button.
Follow the prompts to sign up and submit your data.
Make sure to check your SPAM FILTER for the confirmation and to you save into your address book.
You are now registered and can begin entering your site data! 5

4. 1 Instructions on How to Register Your Monitoring Data [Part One]
Register your Monitoring Site
Once you have logged in, the site will take you to the Welcome Page. Click on the green “Add a Site” button to add your monitoring site information.

5. 2
2. Fill out the form with your monitoring site information. When you reach “Latitude” and “Longitude” fields, click on the “Map It” link. Clicking on this link will open a new window.

6. 5 3
The “Map It” tool will open up in a separate window and show a satellite view of different continents.
Use the “Zoom In” button to pin point the exact location of your monitoring site.
Once you zoom in to your exact site location, drag the Red Pin to those coordinates.
Click on the “Select and Close” button.
TIPS (Please Read):
The Red Pin does not act as a guide for the Zoom In button
Zooming in until you cannot zoom in any more will help you retrieve the exact coordinates for your site location 4

7. 6. Once you see your latitude and longitude inserted, click the “Submit” button.

8. 1 2 3
You should now be able to see your monitoring site on your Welcome Page and its Latitude and Longitude.
Instructions on How to Register Your Monitoring Data [Part Two]
Check the button next to the Site you wish to edit
Click on the blue “Enter Data” button to insert your monitoring data
If you need to go back and change any information regarding your monitoring site, click on the “Edit Site Details” button

9. Once you’ve clicked on the “Enter Data” button, the site will take you to a data form.
4. When you get to the last question “Do you have macroinvertebrate (insect/worm/snail) data to enter?” and you click “YES”, you must answer another series of questions.
If you clicked “No”, then click on the blue “Submit” button. 4

10. 5. If you clicked “Yes” to the question “Do you have macroinvertebrate data to enter?”, please check the boxes next to the species you observed at your monitoring site. Click “Submit” when finished.

11. 6. Click “Okay“ at the bottom of the page.
You are now finished entering your site and monitoring data!
Extra Tips:
If you need to enter data for the same site, but on two different occasions/dates, simply check the site on your Welcome Page and enter in the new data. You do NOT need to insert the monitoring site information a second time.
You can now view your site data on our WWMD DATA MAP 