1. Panasonic Attune HD3 Headset WX-CH455M
Staging and preparing The HD3 headset for McD
WX-455M-C3010 for the WX-C3010 Center Module
WX-455M-CC41X for the WX-CC411/412 Center Modules
Start

2. needed Micro USB Data Cable HD3 Settings Tool Software
Can not use charge only cable
You can test if the cable is a Charge Cable by connecting and the software will not connect to headset
HD3 Settings Tool Software
Available on the FTP3.Panasonic.Com site
WX-CH455 HD3 Headset
Battery not needed
Windows PC
Windows 7 or higher
Quick Link Buttons
HD3 Headset Steps
WX-CH455M-C3010
Steps
WX-CH455M-CC41X
Steps
Save/Open Settings

3. HD3 Headset Steps P1 P2 P3 P4 Open HD3 Headset Cover (P1 & P2)
Plug in Data Cable to the headset and the PC (P3)
Start the Software
Turn on HD3 Headset (P4)
You do not need the battery in the headset P3 P4

4. Software Steps For WX-CH455M1
Open Software
Should display Connected
Hit the [Receive] Button
Set Default Settings:
Talk Button Setting: Talk Lock
Page Button Setting: PTP
Talk/Page Auto Off Setting: On
Voice Prompt Setting: English
Center Module Model Selection: WX- C3010
Headset Microphone Gain: Off
Talkback: Off
Hit the [Update Headset] Button
Disconnect headset and re-box Headset.
Put note page in the box and reseal.

5. Software Steps For WX-CH455M2
Open Software
Should display Connected
Hit the [Receive] Button
Set Default Settings:
Talk Button Setting: Talk Lock
Page Button Setting: PTP
Talk/Page Auto Off Setting: On
Voice Prompt Setting: English
Center Module Model Selection: CC411/WX-CC412
Headset Microphone Gain: Off
Talkback: Off
Hit the [Update Headset] Button
Disconnect headset and re-box Headset.
Put note page in the box and reseal.

6. Save/Load Settings To save and load settings to speed changing settings.
Open Software
Click Save As or Open
Save As:
Once the settings have been adjusted, use this feature to save these settings to program the next headsets much faster.
Open
To load the previous saved settings, click File/Open and select the file that was created with the “Saved As” feature. Once opened, you can skip changing the settings and just click [Update headset] button.