1. Avaya Online UPS Options
VA UPS

2. Bypass Distribution Module (BDM)
Replace or service UPS without shutting down connected equipment
Provides surge protection in absence of the UPS
Protects laser printer with surge protection (no battery backup)
SAP Code:

3. BDM Configuration Mounts to rear panel of UPS
Used in both tower and rack-mount applications
Covers existing UPS output receptacles, but allows access EBM connector, REPO port, etc.
Weighs only 2.5 lb./1.1 kg

4. 230V Bypass Distribution Module
IEC-320-C13 receptacle for laser printer (surge protection only)
Phillips head screw attaches to UPS rear panel
Bypass Switches (for both Load Segments)
Load Segment 2 (3) IEC-320-C13
Phillips head screw attaches to UPS rear panel
Access to circuit breaker on UPS rear panel
IEC-320-C14 for UPS line cord
Load Segment 1 (3) IEC-320-C13

5. Extended Battery Cabinet
XBU48
Hawker DataSafe Battery
8 ea, 300W batteries
UPS Mounts on Top
No extra footprint required
Built-in charger
Daisy-chain up to 3 cabinets
Up to 12 hours of holdover time

6. EBC48 Runtimes (in hours)
One Two Three Load EBC48 EBC48 EBC48
650 VA/455W 14 >14 >14
800 VA/560W 11 >12 >12
1000 VA/700W 8.4 >12 >12
1250 VA/875W* 6.4 >12 >12
1500 VA/1050W* >12
1600 VA/1120W** >12
1800 VA/1260W** >12
2000 VA/1400W**
*Runtimes do not apply for 1000 VA model. **Runtimes apply for 2000 VA model only. Note: runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc.

7. X-Slot™
Standard unit is equipped with an RS-232 serial communications port and an alarm adapter that works perfectly with Definity®; an optional, hot-swappable SNMP module may be ordered, too.
X-Slot
ConnectUPS SNMP Module
Option part numbers:
ConnectUPS SNMP Module: (ordered as an option)
USB Module: (factory installed option only)
RS-232 Single Port Module: (installed as standard)
RS-232 Multi-Port Module: (ordered as an option)
Rear Panel

8. X-Slot ConnectUPS-M SNMP Communications Modem capability
Serial communications