Presentation is loading. Please wait.

Presentation is loading. Please wait.

LTI no 42: 6/Sept/00 This spinner is used to unscrew the drill-pipe from the string. When done the pipe is lifted,

Published byErnst Holter Modified over 5 years ago

Similar presentations

Presentation on theme: "LTI no 42: 6/Sept/00 This spinner is used to unscrew the drill-pipe from the string. When done the pipe is lifted,"— Presentation transcript:

1 LTI no 42: /Sept/00 This spinner is used to unscrew the drill-pipe from the string. When done the pipe is lifted, the spinner is released and the drill-pipe is pulled away by hand to be set down on the floor. Spinner

2 Discuss in your team: What do you think could go wrong here?
LTI no 42: /Sept/00 Discuss in your team: What do you think could go wrong here?

3 LTI no 42: Spinner crushes finger 6/Sept/00
This is what happened: The floor-man placed his hand on the joint BEFORE the spinner was released. Spinner was disengaged and dropped a few inches (normal). His finger was crushed and badly cut between the spinner and the drill pipe. He will be off work for several weeks.

4 LTI no 42: Spinner crushes finger 6/Sept/00
What caused this LTI ??: - Hand placed where it should not have been! - Hazard/danger not seen. - Lack of concentration/attention. - Poor communication between driller and floor-man - Hurry, get the job done as quick as we can Discuss in your team: - How could this incident have been prevented? - How do you keep concentration on a task you have done many many times ? - Do you have toolbox talks on routine jobs?

Download ppt "LTI no 42: 6/Sept/00 This spinner is used to unscrew the drill-pipe from the string. When done the pipe is lifted,"

Similar presentations

The injured party was attempting to tighten the nut when the Annular BOP was being lowered. LTI no 29: Finger crushed 25/June/2000 Auch !!!!

The injured party was attempting to tighten the nut when the Annular BOP was being lowered. LTI no 29: Finger crushed 25/June/2000 Auch !!!!
Here are a couple of pictures of what can happen with a snagged stand while running or pulling out of the hole. This recently happened on a Lakota rig.

Here are a couple of pictures of what can happen with a snagged stand while running or pulling out of the hole. This recently happened on a Lakota rig.
1 Well Engineering has suffered an alarming and increasing number of incidents of injuries resulting from the use of Hand Tools ! Using the wrong Hand.

1 Well Engineering has suffered an alarming and increasing number of incidents of injuries resulting from the use of Hand Tools ! Using the wrong Hand.
This helper has been told by his foreman to wait for him to help lift off this 50 kg drilling tool. He decides to check if the lifting cap is properly.

This helper has been told by his foreman to wait for him to help lift off this 50 kg drilling tool. He decides to check if the lifting cap is properly.
TWM STOP 5/02 Slide 1 To date in 2002 there has been, To date in 2002 there has been, 6 Lost Time Incidents & 55 injuries in Well Engineering (6 LTI’s.

TWM STOP 5/02 Slide 1 To date in 2002 there has been, To date in 2002 there has been, 6 Lost Time Incidents & 55 injuries in Well Engineering (6 LTI’s.
LTI 011 Crushed Finger 13/May/2001 Crew were removing earth from bund wall area using a large metal skip. Position of skip had to be changed to help filling.

LTI 011 Crushed Finger 13/May/2001 Crew were removing earth from bund wall area using a large metal skip. Position of skip had to be changed to help filling.
LTI no 37: Cook cuts off finger 18/Aug/00 A cook was preparing lunch for a camp in Fahud. He was cutting chicken with a large kitchen knife.

LTI no 37: Cook cuts off finger 18/Aug/00 A cook was preparing lunch for a camp in Fahud. He was cutting chicken with a large kitchen knife.
LTI 03: Joint Rolled off catwalk 12/Feb/01 One end of a casing joint fell between two sections of pipe rack support, hit a floorman and badly injured his.

LTI 03: Joint Rolled off catwalk 12/Feb/01 One end of a casing joint fell between two sections of pipe rack support, hit a floorman and badly injured his.
There was a Problem when making up coupling. Could not properly engage the pipe thread. When struggled to undo the rig tongs, fingers got into wrong place.

There was a Problem when making up coupling. Could not properly engage the pipe thread. When struggled to undo the rig tongs, fingers got into wrong place.
Forklift operator and helper are trying to get this kelly (pipe) into the casing. Helper is giving hand signals to driver. LTI no 40: 1/Sept/00 Kelly casing.

Forklift operator and helper are trying to get this kelly (pipe) into the casing. Helper is giving hand signals to driver. LTI no 40: 1/Sept/00 Kelly casing.
Always use proper handles of the pipe spinner

Always use proper handles of the pipe spinner
PDO Incident First Alert –NDSC Pup joint final landing place

PDO Incident First Alert –NDSC Pup joint final landing place
PDO Incident First Alert – MB Petroleum

PDO Incident First Alert – MB Petroleum
PDO Safety Advice What happened?

PDO Safety Advice What happened?
CRUSHED FINGERS ! LTI # 01 01/Jan/02

CRUSHED FINGERS ! LTI # 01 01/Jan/02
PDO Incident First Alert - PDO Insourcing

PDO Incident First Alert - PDO Insourcing
Never intervene to correct obstacles without stopping the activity

Never intervene to correct obstacles without stopping the activity
Always ensure the right tools are used for the task

Always ensure the right tools are used for the task
PDO Second Alert What happened? Ensure you are out of the danger zone

PDO Second Alert What happened? Ensure you are out of the danger zone
LTI no 17: 27/April/2000 Finger and Hose

LTI no 17: 27/April/2000 Finger and Hose

Similar presentations

Ads by Google