1. [AttuneII]How to get the screenshot on the Center Module
Preparation PC
SD Memory Card
RS-232C
Interface cable for Attune2
Connect PC to the center module by interface cable(RS-232C) for Attune2.
Insert SD/SDHC memory card.
Operation
Start terminal software and set as below.
Speed : 19200bps
Data bit : 8bit
Parity bit : none
Stop bit : 1bit
Show the image which you want to take a screenshot on the LCD.
Input below commands on the terminal software.
Command : gsav -f \\[File name].bmp
(* ‘\’ means “Backslash”)
ex) gsav -f \\SettingInformation.bmp
Then the image file which named by command is saved in root directory
on SD/SDHC memory card.
Show the image on the LCD
Input the commands.
Saved on SD/SDHC card