1. QuickVet Software Update
Instructions and screens
SMB, August 31, 2010

2. Extract files to a USB stick
Important Note: If you choose to store the update software package on a file server, then store it in its ZIP file.
Right click on the received zip file and select extract all.
When prompted select your blank USB stick as the destination drive.

3. Insert USB Stick
In idle mode, insert the USB-stick with the update files in the USB port on the back of the instrument.
ADVICE: DO NOT USE THE ”UPDATE USB STICK” FOR OTHER PURPOSES

4. Go to settings
Touch ”Setup”

5. Select Software v.

6. Touch “Upgrade” and “Yes”

7. Software Update in progress
Important note!: If a system update is necessary,
the instrument will prompt to reboot twice! Follow instructions and
DO NOT TURN OFF THE INSTRUMENT IN THE PROCESS.
A system update is necessary
This screen will show for a few minutes.
This screen will show shortly.
When the update is ready,
the new version will start automatically.

8. Remove USB stick When in the idle mode, remove the USB stick
The new software version
is shown in the settings screen.
New software is now ready to use