2. Experiment1 Ohm's Law Project Name:Experiment1 Ohm's Law Description: Author:ErtEris Copyright:

3. Slide 1

4. Left click here, for parts selection Left click here

5. Click on [Modelling Primitives] item

6. Click on [Analog (SPICE)] item

7. Click on [RESISTOR] item

8. Click on [OK] button

9. Left click here for next component selection Left click here

10. Click on [Simulator Primitives] item

11. Click on [VSOURCE] item

12. Click on [OK] button

13. Left click here, for positioning DC source Left click here

14. Click on [RESISTOR] item

15. Left click here

16. Right click here

17. Select [Rotate Clockwise Num--] menu item

18. Left click here

22. Double click here

23. Click on [Voltage:] text box

24. Type [X]

25. Click on [OK] button

26. Double click here

27. Click on [Resistance (Ohms):] text box

28. Click on [OK] button

29. Click on [Terminals Mode] radio button

30. Click on [GROUND] item

31. Left click here

34. Click on [Current Probe Mode] radio button

35. Left click here

36. Double click here

37. Click on [Name:] text box

38. Type [I]

39. Click on [OK] button

40. Click on [Graph Mode] radio button This is simulation stage, that is circuit and input/output are determined. Click on [Graph Mode] radio button

41. Click on [DC SWEEP] item The chosen "DC SWEEP" is one of the simulation type. "Analogue is another simulation type which will be seen in later examples. Click on [DC SWEEP] item

42. Left click here

45. Click on [Add Traces...] button

46. Click on [Open] button

47. Click on [I] item

48. Click on [OK] button

49. Click on [Edit Graph...] button

50. Click on [Stop value:] text box

51. Type [10] Type [0]

52. Click on [OK] button

53. Click on [Yes] button

54. Click on [Stop] button