Presentation is loading. Please wait.

Presentation is loading. Please wait.

Screw and screw selection

Similar presentations


Presentation on theme: "Screw and screw selection"— Presentation transcript:

1 Screw and screw selection
Experiment 3 Screw and screw selection

2 Screws

3 Maximum shear theory Case 1 Case 2 Case 3

4

5 Square thread and Acme thread
Square thread ACME

6 Power screw

7

8 Torque without friction
efficiency Torque required to raising the load Torque required to lowering the load Torque due to collar

9 1 Slide 5.

10 1

11 1 Left figure

12 1

13 Joint- fastener stiffness

14

15 Joint- member stiffness

16 Bolt strength Table 5-9

17

18 Tension Joints- the external load
For bolt with initial load Fi the force on the bolt Fb is The force on the member Fb is The stress in a bolted joint with preload Eq. 5-28

19 Statically loaded tension joint with preload
Proof load 5-30 Fatigue loading of tension joints

20

21

22

23

24

25

26

27

28 Practice 1 A jack is shown as following:

29 If the dimension of each bar of the jack is 250mm
If the dimension of each bar of the jack is 250mm. If this jack need to rise 10000N load and can self lock. Try to design this jack.

30 Practice 2 Determine the bolt size of the bicycle as shown.

31

32 D=25mm 200mm 280mm The dimensions of the handle bar of a bicycle are shown in figure. Try to design the screw of the clamp.


Download ppt "Screw and screw selection"

Similar presentations


Ads by Google