1. Model Reversion : A Client : Slider qty : 3 Model : Latte-2nd
Lifter qty :
Part name :
Frame,2nd drawer Main,MP_2-2
Gate type :
Pin gate
Part no.. : A
Cavities : 1
DFM by :
WeiYong
2/3 Plate :
3 plate

2. DFM follow-up issue. Integral Corrective Action List
ICAL
ICAL
1 - Date of opening (all dates in 2036)
2 - Date of beginning of action
3.- Date foreseen for validation
DFM follow-up issue Integral Corrective Action List
4 – Date of validation (closing)
Page
Open points
Solutions / Action
Who 1 2 3 4
P.3
Gate (mold flow)
Waiting for confirmation.
08/09
P.4
Parting line
P.5
P.6
P.7
Slider
Waiting for confirmation
P.8
Suggestion (others)
P.9
P.10
P.11
Draft angle
P.12
P.13
P.14
P.15
P.16

3. Gate (mold flow)
Four pin gate

4. Parting line
cavity
core

5. Parting line
cavity
core

6. Parting line
cavity
core

7. PLS add slider pins for preventing sticking in slider half.

8. THIS AREA NEED CUT PLASTIC BE FREE OF SINK MARK.
Suggestion (others)
THIS AREA NEED CUT PLASTIC BE FREE OF SINK MARK.

9. THIS AREA NEED CUT PLASTIC BE FREE OF SINK MARK.
Suggestion (others)
THIS AREA NEED CUT PLASTIC BE FREE OF SINK MARK.

10. THIS AREA NEED CUT PLASTIC BE FREE OF SINK MARK.
Suggestion (others)
THIS AREA NEED CUT PLASTIC BE FREE OF SINK MARK.

11. Draft angle
This yellow surface need cut plastics 1° for slider release.
This yellow surface need cut plastics 1° for slider release.

12. This yellow surface need cut plastics 1° for slider release.
Draft angle
This yellow surface need cut plastics 1° for slider release.

13. This yellow surface need cut plastics 1° for slider release.
Draft angle
This yellow surface need cut plastics 1° for slider release.

14. Draft angle This red surface need cut plastics 3° for shutoff.

15. This shade surface need cut plastics 3° for shutoff.
Draft angle
This shade surface need cut plastics 3° for shutoff.

16. Draft angle
All yellow surface no draft angle. PLS cut plastics 1° for cavity release, cut plastics 0.5° for core release.