1. 1 Cable Assembly for CanSat

2. 2 Heat Shrink Tubing Battery Pack Connection Pin Connectors Radio Cables Mic & Speaker Plugs See close up connection page 4 Pin Connectors Heat Shrink Tubing Pin Connectors Completed Radio Cable Completed Battery Pack Cable with Switch

3. 3 Assembly of RS-232 Cable RS-232 Cable to Connect CanSat to Computer Pins 1 Check to make sure it is pin 1 Cable Parts Align the black line with pins 1 on both connectors. Leave about ¾ beyond connector Connectors with cable caps 12 3 4 5 6 7 8 Continuity Test

4. 4 Connect center conductor of coax to center pin, shield to outer ground. Coax Center Conductor Insulation Shield Connection

5. 5 Completed Development Assembly CanSat FRS Radio RS-232 Cable Power Cable with Switch Battery Pack Radio Cables Basic Stamp Jumper Setting for battery