Download presentation
Presentation is loading. Please wait.
1
Smitty’s Super Speed Drill for Memorization No. 2 Resistor Color Codes
© Ted Smith 2017 Electrical Experts Consulting
2
Be sure to place this presentation in Slide Show Mode if it is not already in that mode before proceeding The purpose of this drill is to help you memorize the resistor color codes. Each slide will contain a question. The question will remain in the screen for a period of 60 seconds to begin with and will decrease in time as you progress. A notification sound will ring as the slide transitions to the answer. The Answer will only remain for 5 seconds. After this slide there are two charts, one for Four Band Resistors and One for Five Band resistors, that you can review before starting the drill. Click on the slide to go to the charts and once you have finished reviewing them, click on that slide to start the timer and begin the drill Instructions
3
Color Code Review Bad= Black Beer= Brown Rotts = Red Our= Orange
Young= Yellow Guts= Green But= Blue Vodka= Violet Goes= Gray Well= White
4
SUPER SPEED MEMORY DRILL
5
10 Ohms with 10% Tolerance Answer
6
SUPER SPEED MEMORY DRILL
7
453 Ohms with 1% Tolerance Answer
8
SUPER SPEED MEMORY DRILL
9
2.2M Ohms with 5% Tolerance Answer
10
SUPER SPEED MEMORY DRILL
11
6.3k Ohms with 5% Tolerance Answer
12
SUPER SPEED MEMORY DRILL
13
3.3M Ohms with 1% Tolerance Answer
14
SUPER SPEED MEMORY DRILL
15
4.02K ohms with 10% Tolerance Answer
16
SUPER SPEED MEMORY DRILL
17
6.3K Ohms with 5% Tolerance Answer
18
SUPER SPEED MEMORY DRILL
19
1000 Ohms with 2% Tolerance Answer
20
SUPER SPEED MEMORY DRILL
21
7.67M Ohms with 2% Tolerance Answer
22
SUPER SPEED MEMORY DRILL
23
8.2M Ohms with 5% Tolerance Answer
24
SUPER SPEED MEMORY DRILL
25
660 Ohms with 2% Tolerance Answer
26
SUPER SPEED MEMORY DRILL
27
11,000 Ohms with 5% Tolerance Answer
28
SUPER SPEED MEMORY DRILL
29
10 Ohms with 10% Tolerance Answer
30
SUPER SPEED MEMORY DRILL
31
2.2M Ohms with 5% Tolerance Answer
32
SUPER SPEED MEMORY DRILL
33
453 Ohms with 1% Tolerance Answer
34
SUPER SPEED MEMORY DRILL
35
4.02K ohms with 10% Tolerance Answer
36
SUPER SPEED MEMORY DRILL
37
6.3k Ohms with 5% Tolerance Answer
38
SUPER SPEED MEMORY DRILL
39
453 Ohms with 1% Tolerance Answer
40
SUPER SPEED MEMORY DRILL
41
22 Ohms with 2% Tolerance Answer
42
SUPER SPEED MEMORY DRILL
43
3.3M Ohms with 1% Tolerance Answer
44
SUPER SPEED MEMORY DRILL
45
12 Ohms with 5% Tolerance Answer
46
SUPER SPEED MEMORY DRILL
47
63 Ohms with 10% Tolerance Answer
48
SUPER SPEED MEMORY DRILL
49
72 Ohms with 10% Tolerance Answer
50
SUPER SPEED MEMORY DRILL
51
200 Ohms with 5% Tolerance Answer
52
SUPER SPEED MEMORY DRILL
53
220k Ohms with 5% Tolerance Answer
54
SUPER SPEED MEMORY DRILL
55
325 Ohms with 2% Tolerance Answer
56
SUPER SPEED MEMORY DRILL
57
630 Ohms with 5% Tolerance Answer
58
SUPER SPEED MEMORY DRILL
59
6.3k Ohms with 5% Tolerance Answer
60
SUPER SPEED MEMORY DRILL
61
8.2M Ohms with 5% Tolerance Answer
62
SUPER SPEED MEMORY DRILL
63
2.2M Ohms with 5% Tolerance Answer
64
SUPER SPEED MEMORY DRILL
65
453 Ohms with 1% Tolerance Answer
66
SUPER SPEED MEMORY DRILL
67
63 Ohms with 10% Tolerance Answer
68
SUPER SPEED MEMORY DRILL
69
325 Ohms with 2% Tolerance Answer
70
SUPER SPEED MEMORY DRILL
71
10 Ohms with 10% Tolerance Answer
72
SUPER SPEED MEMORY DRILL
73
6.3k Ohms with 5% Tolerance Answer
74
SUPER SPEED MEMORY DRILL
75
12 Ohms with 5% Tolerance Answer
76
SUPER SPEED MEMORY DRILL
77
220k Ohms with 5% Tolerance Answer
78
SUPER SPEED MEMORY DRILL
79
8.2M Ohms with 5% Tolerance Answer
80
SUPER SPEED MEMORY DRILL
81
453 Ohms with 1% Tolerance Answer
82
END of QUIz. THE TIME WILL STOP NOW
END of QUIz. THE TIME WILL STOP NOW. PLEASE CLICK ON THE SLIDE TO CONTINUE WITHOUT THE TIMER AND REVIEW EACH QUESTION.
83
SUPER SPEED MEMORY DRILL
84
10 Ohms with 10% Tolerance Answer
85
SUPER SPEED MEMORY DRILL
86
453 Ohms with 1% Tolerance Answer
87
SUPER SPEED MEMORY DRILL
88
2.2M Ohms with 5% Tolerance Answer
89
SUPER SPEED MEMORY DRILL
90
6.3k Ohms with 5% Tolerance Answer
91
SUPER SPEED MEMORY DRILL
92
3.3M Ohms with 1% Tolerance Answer
93
SUPER SPEED MEMORY DRILL
94
4.02K ohms with 10% Tolerance Answer
95
SUPER SPEED MEMORY DRILL
96
6.3K Ohms with 5% Tolerance Answer
97
SUPER SPEED MEMORY DRILL
98
1000 Ohms with 2% Tolerance Answer
99
SUPER SPEED MEMORY DRILL
100
7.67M Ohms with 2% Tolerance Answer
101
SUPER SPEED MEMORY DRILL
102
8.2M Ohms with 5% Tolerance Answer
103
SUPER SPEED MEMORY DRILL
104
660 Ohms with 2% Tolerance Answer
105
SUPER SPEED MEMORY DRILL
106
11,000 Ohms with 5% Tolerance Answer
107
SUPER SPEED MEMORY DRILL
108
10 Ohms with 10% Tolerance Answer
109
SUPER SPEED MEMORY DRILL
110
2.2M Ohms with 5% Tolerance Answer
111
SUPER SPEED MEMORY DRILL
112
453 Ohms with 1% Tolerance Answer
113
SUPER SPEED MEMORY DRILL
114
4.02K ohms with 10% Tolerance Answer
115
SUPER SPEED MEMORY DRILL
116
6.3k Ohms with 5% Tolerance Answer
117
SUPER SPEED MEMORY DRILL
118
453 Ohms with 1% Tolerance Answer
119
SUPER SPEED MEMORY DRILL
120
22 Ohms with 2% Tolerance Answer
121
SUPER SPEED MEMORY DRILL
122
3.3M Ohms with 1% Tolerance Answer
123
SUPER SPEED MEMORY DRILL
124
12 Ohms with 5% Tolerance Answer
125
SUPER SPEED MEMORY DRILL
126
63 Ohms with 10% Tolerance Answer
127
SUPER SPEED MEMORY DRILL
128
72 Ohms with 10% Tolerance Answer
129
SUPER SPEED MEMORY DRILL
130
200 Ohms with 5% Tolerance Answer
131
SUPER SPEED MEMORY DRILL
132
220k Ohms with 5% Tolerance Answer
133
SUPER SPEED MEMORY DRILL
134
325 Ohms with 2% Tolerance Answer
135
SUPER SPEED MEMORY DRILL
136
630 Ohms with 5% Tolerance Answer
137
SUPER SPEED MEMORY DRILL
138
6.3k Ohms with 5% Tolerance Answer
139
SUPER SPEED MEMORY DRILL
140
8.2M Ohms with 5% Tolerance Answer
141
SUPER SPEED MEMORY DRILL
142
2.2M Ohms with 5% Tolerance Answer
143
SUPER SPEED MEMORY DRILL
144
453 Ohms with 1% Tolerance Answer
145
SUPER SPEED MEMORY DRILL
146
63 Ohms with 10% Tolerance Answer
147
SUPER SPEED MEMORY DRILL
148
325 Ohms with 2% Tolerance Answer
149
SUPER SPEED MEMORY DRILL
150
10 Ohms with 10% Tolerance Answer
151
SUPER SPEED MEMORY DRILL
152
6.3k Ohms with 5% Tolerance Answer
153
SUPER SPEED MEMORY DRILL
154
12 Ohms with 5% Tolerance Answer
155
SUPER SPEED MEMORY DRILL
156
220k Ohms with 5% Tolerance Answer
157
SUPER SPEED MEMORY DRILL
158
8.2M Ohms with 5% Tolerance Answer
159
SUPER SPEED MEMORY DRILL
160
453 Ohms with 1% Tolerance Answer
Similar presentations
