2. UTP Transmission

3. Single Channel Active Video Transmitter Model Number: SVU-AT Product Description: SVU-AT is the Veilux series of active video balun which can provide extended distance between CCTV camera and DVR or multiplexer via UTP cable. SVU-AT is single channel active transmitter works with SVU-AR as receiver in pairs.

4. Transmission distance of color signal via CAT5 or CAT6 Up to 1500m (4900 ft) with active receiver DC12V/AC24V power supply, power supply reversed polar protection Built-in transient protection Dip switch with 2-level adjustment of brightness and sharpness Excellent noise and crosstalk rejection function Product Feature

5. Product Terminal and Dimension Introduction VIDEO IN Signal Indicator Power Indicator VIDEO + UTP CABLE VIDEO - UTP CABLE GND AC/DC IN + AC/DC IN - Gain Dip Switch

6. Product Code Settings

7. Product Installation Instructions Connect POWER+/- terminal to power, then power indicator becomes light. Connect coming transmission video indicator to BNC terminal of transmitter, then green video indicator becomes light Select one pair of UTP cable and respectively connect to VIDEO +/- of transmitter Adjust dip switch for distance. Connect GND terminal to the ground

8. Product Connection Diagram

9. Single Channel Active Video Receiver Model Number: SVU-AR Product Description : SVU-AR is the Veilux series of active video balun which can provide extended distance between CCTV camera and DVR or multiplexer via UTP cable. SVU-AR is single channel active receiver works with SVU-AT as transmitter in pairs.

10. Transmission distance of color signal via CAT5 or CAT6 Up to 1500m (5000ft) with active transmitter DC12V/AC24V power supply, power supply reversed polar protection 6-level adjustment of brightness and sharpness compensation Dip switch and potentiometer double control. Excellent noise and crosstalk rejection function Built-in transient protection Product Feature Single Channel Active Video Receiver Model Number: SVU-AR

11. Product Terminal and Dimension Introduction ---- VIDEO OUT ----Signal Indicator ---- Power Indicator ----VIDEO + UTP CABLE ----VIDEO - UTP CABLE ---- GND --- AC/DC IN + ---- AC/DC IN - --- Potentiometer ----Gain Dip Switch

12. Product Code Settings

13. Product Installation Instructions Connect POWER+/- terminal to power, then power indicator becomes light. Select one pair of UTP cable and respectively connect to VIDEO +/- of transmitter Connect BNC terminal to signal processing equipment (such as monitor etc.) Adjust gain in line with distance dip switch diagram above. Connect GND terminal to the ground

14. Product Connection Diagram

15. 8- Channel Active Video Hub Model Number: SVU–AR8 Product Description : SVU-AR8 is suitable for centralized mounting of multi- channel receivers, thereby helping to reduce on-site service cost.

16. Transmission distance of color signal via CAT5 or CAT6 Up to 800m (2667ft) with passive transmitter Up to 1500m (5000ft) with active transmitter 6 level independent gain, sharpness, brightness control Suitable for direct installation in surveillance cabinets Excellent anti-interference ability Built-in transient protection Product Feature 8- Channel Active Video Hub Model Number: SVU–AR8

17. Product Terminal and Dimension Introduction ---- POWER INPUT ---- VIDEO + ---- VIDEO - ---- GND ---- VIDEO OUTPUT ---- GAIN DIP SWITCH (transmission distance dip switch) ---- POWER SWITCH ---- POWER INDICATOR ---- POTENTIOMETER (brightness adjustment) ----SIGNAL INDICATOR

18. Product Code Settings

19. Product Installation Instructions Power supply, blue power indicator light. Connect coming transmission video indicator to BNC terminal of transmitter, then green video indicator becomes light. Connect BNC terminal to signal processing equipment (such as monitor etc.) Adjust gain in line with distance dip switch diagram above. Connect GND terminal to the ground

20. Product Connection Diagram

21. 16- Channel Active Video Hub Model Number: SVU–AR16 Product Description : SVU-AR16 is a 16 channel active video hub used for centered video transmission, which can save project cost and be very convenient in construction.

22. Transmission distance of color signal via CAT5 or CAT6 Up to 800m (2667ft) with passive transmitter, Up to 1500m (5000ft) with active transmitter 6 level independent gain, sharpness, brightness control 1U rack mounting panel, suitable for direct cabinet installation Excellent anti-interference ability Built-in transient protection Product Feature 16- Channel Active Video Hub Model Number: SVU–AR16

23. Product Terminal and Dimension Introduction ---- POWER INPUT ---- VIDEO + ---- VIDEO - ---- GND ---- VIDEO OUTPUT ---- GAIN DIP SWITCH (transmissi on distance dip switch) ---- POWER SWITCH ---- POWER INDICATOR ---- POTENTIOMETER (brightness adjustment) ----SIGNAL INDICATOR

24. RJ45 Pins,Product Code Settings

25. Product Installation Instructions Power supply, blue power indicator light. Connect coming transmission video indicator to BNC terminal of transmitter, then green video indicator becomes light. Connect BNC terminal to signal processing equipment (such as monitor etc.) Adjust gain in line with distance dip switch diagram above. Connect GND terminal to the ground

26. Product Connection Diagram

27. Single Channel Passive Transceiver Model Number: SVU-PT/R Product Description SVU-PT/R is designed to provide superior immunity from noise and interference, such as RFI and EMI. SVU- PT is used as video transmitter while SVU-PR as receiver. We suggest you use them in pairs.

28. Transmission distance of color signal via CAT5 or CAT6 Up to 300m (1000 ft) with passive balun (from camera to monitor) Up to 800m (2667ft) with formal active receiver No need to provide power Excellent anti-interference ability Built-in transient protection Open on spot and easy connection for installation Product Feature Single Channel Passive Transceiver Model Number: SVU-PT/R

29. Product Terminal and Dimension Introduction ---- Video Input and Output ---- Video In V + UTP CABLE ---- Video In V - UTP CABLE ---- GND

30. Product Installation Instructions Selected a pair of UTP Cable (must be same color) connect to the transmitter VIDEO +/- port and receiver VIDEO +/- port. Connect the video signal of receiver to display device. GND terminal connect to the ground (part product without this interface

31. Product Connection Diagram

32. 8 Ch Passive Video Hub Model Number: SVU-PR8 Product Description SVU-PR8 is an 8 port video receiver hubs with surge suppression. It is suitable for centralized mounting of big project. And it is very convenient in project installation.

33. Transmission distance of color signal via CAT5 or CAT6 Up to 300m (1000 ft) with passive transmitter No need to provide power Built-in transient protection Excellent anti-interference ability and stable performances Product Feature 8 Ch Passive Video Hub Model Number: SVU-PR8

34. Product Terminal and Dimension Introduction VIDEO OUT VIDEO IN V+ (UTP Cable) VIDEO IN V – (UTP Cable) GND

35. Product Installation Instructions Connect coming transmission video indicator to BNC terminal of transmitter Select one pair of UTP cable (It must be the same color) and respectively connect to VIDEO +/- of transmitter Connecting the receiver hub video signal to the BNC terminal of display devices Connect GND terminal to the ground

36. Product Connection Diagram

37. 16 Ch Passive Video Hub Model Number: SVU-PR16 Product Description SVU-PR16 is a 16 port video receiver hubs with surge suppression. It is suitable for centralized mounting of big project. And it is very convenient in project installation.

38. Transmission distance of color signal via CAT5 or CAT6 Up to 300m (1000 ft) with passive transmitter No need to provide power Built-in transient protection Excellent anti-interference ability and stable performances Product Feature 16 Ch Passive Video Hub Model Number: SVU-PR16

39. Product Terminal and Dimension Introduction ---- VIDEO OUT ---- VIDEO IN V+ (UTP Cable) ---- VIDEO IN V – (UTP Cable) ---- GND

40. Product Installation Instructions Connect coming transmission video indicator to BNC terminal of transmitter Select one pair of UTP cable and respectively connect to VIDEO +/- of transmitter Connecting the receiver hub video signal to the BNC terminal of display devices Connect GND terminal to the ground

41. Product Connection Diagram