1. Occupational Health and Safety (OHS)

2. It is also expected that they can  give at least six occupational health and safety (OHS) that are related to computer hardware servicing.

3. The following are the examples of OHS that is related to computer hardware servicing.
Contingency measures during workplace accidents, fire and other emergencies are recognized.
Personal protective equipment are correctly used in accordance with organization OHS procedures and practices.
Hazard/risks in the workplace and their corresponding indicators are identified to minimize or eliminate risk to co-workers, workplace and environment.
Always discharge yourself before touching any part of the computer.
Be careful with tools that may cause short circuit.
Wear rubber sole shoes when standing on the ground or in a concrete floor. 

4. The following are the examples of OHS that is related to computer hardware servicing.
Always power off and unplug the computer before working on it.
When making circuit changes, switch off and unplug the power cord from the equipment then discharge the capacitors. 
Replace only fuses with those proper rating.
Hold the components by the edges and do not touch the IC’s. 
Read and follow instructions on the manual carefully.
Do not use excessive force if things don’t quite slip into place

5. Categories and with its tools
Work Area
At least 4 sq. meter
Table
Rubber mat
Extension wire (220/110 v)
Fire extinguisher
Materials
Computer casing (ATX/AT)
Motherboard with user’s manual
Microprocessor unit
Power supply unit
Memory modules (DIMM/SIMM/SDRAM/RDRAM)
Video card(PCI, AGP, ISA, Built-in Video Card)
LAN card(Built-in, Internal)

6. Categories and with its tools
Modem (Internal, External)
Drives(FDD, HDD, CD-ROM)
Data Cable
Auto Voltage Regulator (AVR)
Tools
Screwdrivers (philips and flat)
Pliers (long-nose and cutter type)
Anti-static protection
Multimeter
Cable tester
Logic probe
Crimping tool
Scoring tool

7. Categories and with its tools
Side cutter
UTP cable
Cable tie
Gloves
Equipment
Pc system, system unit
Monitor/ keyboard/ mouse
Printer
Computer table and chair

8. Work Area
At least 4 sq. meter

9. Work Area
Table

10. Work Area
Rubber mat

11. Work Area
Extension wire (220/110 v)

12. Work Area
Fire extinguisher

13. Materials
Computer casing (ATX/AT)

14. Materials
Motherboard with user’s manual

15. Materials
Microprocessor unit

16. Materials
Power supply unit

17. Materials
Memory modules (DIMM/SIMM/SDRAM/RDRAM)

18. Materials
Video card(PCI, AGP, ISA, Built-in Video Card)

19. Materials
LAN card(Built-in, Internal)

20. Materials
Modem (Internal, External)

21. Materials
Drives(FDD, HDD, CD-ROM)

22. Materials
Data Cable

23. Materials
Auto Voltage Regulator (AVR)

24. Tools
Screwdrivers (philips and flat)

25. Tools
Pliers (long-nose and cutter type)

26. Tools
Anti-static protection

27. Tools
Multimeter

28. Tools
Cable tester

29. Tools
Logic probe

30. Tools
Crimping tool

31. Tools
Scoring tool

32. Tools
Side cutter

33. Tools
UTP cable

34. Tools
Cable tie

35. Tools
Gloves

36. Equipment
Pc system, system unit

37. Equipment
Monitor/ keyboard/ mouse

38. Equipment
Printer

39. Equipment
Computer table and chair