1. Engineering Systems: Applications FN3K 11

2. Engineering Systems: Applications
Outcomes
1 Apply a block diagram approach to the analysis of engineering systems.
2 Determine the operating principles of engineering systems.
3 Complete a functional specification and evaluation of engineering systems.

3. Outcome 1
The engineering system must comprise of a minimum of four blocks and contain electromechanical elements.
Each block should be correctly labelled with a title description of the block function and all inputs and outputs identified.
All signal/process flow directions are accurately indicated.
The summary report must comprise of between 200 and 400 words detailing the correct function of the overall system.

4. Outcome 2
Correctly determine the function of two blocks (1 electrical/electronic and 1 mechanical/electromechanical) within a given engineering system through interpretation of given drawings, diagrams and technical information.
Correctly identify input and output parameters (values/range) for two blocks (1 electrical/electronic and 1 mechanical/electromechanical) within a given engineering system.
Correctly determine the operating principles of two blocks (1 electrical/electronic and 1 mechanical/electromechanical) within a given engineering system through interpretation of given drawings, diagrams and technical information.

5. Outcome 3
Correctly compile a functional specification for a given engineering system using a given specification template including a minimum of five relevant topics such as:
operating conditions,
environmental conditions,
mounting constraints,
connection details,

6. Outcome 3 power requirements, maintenance details,
disposal requirements and
performance measurements.

7. Outcome 3
Prepare an electronic presentation, using power- point or other suitable presentation aid, correctly outlining the operation of the engineering system and blocks within the system.
The candidate is not required to deliver the presentation but only to prepare and submit the presentation for assessment purposes.

8. Outcome 3
Correctly evaluate the effectiveness of the engineering system in accordance with given evaluation parameters. These evaluation parameters must either include a comparison with comparable products, if appropriate, or an evaluation of the product overall and may in line with the topics selected for the function specification.

9. Engineering Systems: Applications
You will:
Complete reports
Draw engineering diagrams
Prepare an electronic presentation