1. SX-UP2 installation for Windows XP
In this guide you will be instructed on how to install the SX-UP2 cable in combination with the Roland EGX-20
Lode PLessers
Roland DG

2. After the cable is plugged in , the following messages will appear.
- Plug in the cable.
After the cable is plugged in , the following messages will appear.
Lode PLessers
Roland DG

3. Lode Plessers
Roland DG

4. Lode Plessers
Roland DG

5. Lode Plessers
Roland DG

6. - EGX-20 driver installation.
The following steps will show you how to install the EGX-20 driver on the correct communication port.
Lode PLessers
Roland DG

7. Open the “Printer and Faxes” menu
Lode Plessers
Roland DG

8. Add a printer
Lode Plessers
Roland DG

9. Click “Next”
Lode Plessers
Roland DG

10. Local printer attached to the computer
Click “Next”
Lode Plessers
Roland DG

11. Choose the highest USB Port number.
Then click Next.
Lode Plessers
Roland DG

12. Click the “Have Disk…” button
Lode Plessers
Roland DG

13. Click the “Browse…” button.
Click “OK”
Click the “Browse…” button.
Browse to the drivers folder on your CD and select the correct folder for your windows operation system.
Lode Plessers
Roland DG

14. Select the Roland EGX-20
Click “Next”
Lode Plessers
Roland DG

15. Replace existing driver
Click “Next”
Lode Plessers
Roland DG

16. Click “Next”
Lode Plessers
Roland DG

17. Choose NO
Click “Next”
Lode Plessers
Roland DG

18. Click “Finish”
Lode Plessers
Roland DG

19. Choose “Continue Anyway”
Lode Plessers
Roland DG

20. The files will be copied to your computer.
Lode Plessers
Roland DG

21. The Roland EGX-20 is added to your printers and can be used with the SX-UP2 Cable.
Lode Plessers
Roland DG

22. Don’t hesitate to contact us if you need help.
Roland DG
Lode Plessers
Roland DG