1. Move to “Settings” screen.
How to record messages.
Step 1
Record messages.
Move to “Settings” screen.
Touch button on the center module. Then “Password” screen shows up.
Input password and touch “Login” button.
Default Password : 12345
Then “Settings” screen shows up.
Touch button
Input character.
Touch after input password
Change character type

2. How to output NW camera picture to external monitor.
Select message to record.
Touch “Message” button on “Settings” screen. Then “Message” screen shows up.
Touch “XXXXX Message” button.
Then “XXXXX Message” screen shows up. (XXXX : Greeter / Reminder / Alert)
Touch “Message” button.
Then “XXXX Message list” screen shows up. (XXXX : Greeter / Reminder / Alert)
Touch message No. button.
Touch “Message” button
Touch “Message” button
Touch message No.
Select message No.

3. How to output NW camera picture to external monitor.
Recording message.
Touch button. Then “Confirm” popup screen shows up.
Touch “YES” button. Then “Record” screen shows up.
Start PAGE on headset in Lane A. Then message recording will start.
# It is possible to record messages by max 4 headsets.
To stop message recording, [Stop all PAGE] or [Touch button on touch panel].
It is possible to record message up to 20 seconds.
Touch Rec button.

4. How to output NW camera picture to external monitor.
Playing message.
After recording message, message will be played automatically .
Message will broadcast only to headset in Lane A.
Register message.
After playing message, the popup screen shows up as below.
If select “YES”, recorded message will be registered.
If select “No”, recorded message is deleted without registration.
After registration, you can play the message on touch panel operation.
You can play recorded message on headsets.