1. Job Performance Requirement 16-13
Displacing a Dashboard

2. A Make certain that the vehicle is stabilized
A Make certain that the vehicle is stabilized. Cribbing must be placed beneath the rear base of the front door jam on both sides of the vehicle.

3. B Relief cuts are placed 5 to 6 inches below the intersection of the front support at the rocker panel
JPR 16-13B

4. C Relief cuts are also placed 8 to 10 inches back on the horizontal rocker panel on both sides of the vehicle.
JPR 16-13C

5. D Hydraulic rams are inserted between the rear of the door jam and dashboard on both sides of the vehicle. The rams will both be extended at a steady and equal rate until enough room is available for patient removal.
JPR 16-13D

6. E Firefighters will need to place cribbing in the lower relief cuts as the dashboard is folded over to
maintain its position.
JPR 16-13E