1. BurnerMate TS Overview
BurnerMate provides a new packaging concept of boiler control and monitoring. The Burner Mate package provides secure local control and remote control of combustion process.

2. Overview Introduction Components Control Strategies
Auxiliary Controllers / Flame Safeguard
SCADA System Integration
Competitive Comparison
Summary
I think you will agree with me when we are finished that….
the BurnerMate is backed by a wealth of experience
BurnerMate has the best features on the market
Is the easy to use
and is the best value

3. Introduction
The BurnerMate® TS is a combined boiler control, flame safeguard, and monitoring system with a touch screen operator interface.
BurnerMate is a full scope control package that assures safe and efficient control with undivided system integration responsibility.
This complete system offers a single point of responsibility for both combustion control and BMS and the best system integration.
By combining the burner management, combustion control and SCADA functions under one supplier the cost of integrating and interconnecting wiring, between the three suppliers and their equipment is eliminated.

4. Experience
Preferred Instruments has 35 years of Combustion Control Experience with…
A Third Generation Digital Controller
Over 3000 Boiler Control System Installations
Over 2400 PCC II/III Controllers Installed Exclusively in Combustion Control Applications
Over 45 SCADA/Flex Projects
640 Rotary Cup Burner Projects
Preferred Instruments has the experience and know how to design and integrate complete combustion systems……..
PCC II/III Combustion Control Projects....
> 1000 Boilers
624 Jackshaft Controlled Boilers
127 Parallel Positioning Controlled Boilers
103 Metering Controlled Boilers
351 Oxygen Trim Systems
13 EPA Compliant Opacity Monitors

5. BurnerMate TS Components
Preferred Instruments has the experience and know how to design and integrate complete combustion systems……..
PCC II/III Combustion Control Projects....
> 1000 Boilers
624 Jackshaft Controlled Boilers
127 Parallel Positioning Controlled Boilers
103 Metering Controlled Boilers
351 Oxygen Trim Systems
13 EPA Compliant Opacity Monitors

6. Integrated Oxygen Analyzer!
System Composition
10” Touch Screen Operator Interface
Accurate Servo
Actuator
The BurnerMate package includes a control cabinet, SCADA workstation, IR flame scanner, oxygen analyzer and printer.
The BurnerMate whole package is designed, programmed & tested to work together, a complete package.
Integrated Oxygen Analyzer!

7. Touch Screen Operator Interface
Fully Integrated Touch Screen…

8. Touch Screen Operator Interface
Monitor and control boiler operation, setpoints, and process data from one convenient display
Commissioning activities are laid out in an easy to follow step-by-step procedure, eliminating the need for knowledge of controller menus and programming languages

9. Touch Screen Operator Interface
Real time boiler management data
Auto/Manual Control
Alarm banner, Silence button, and Navigation

15. DCS-III Programmable Control
DCS-III Controller…

16. DCS-III Programmable Control
The DCS-III is a state-of-the-art, boiler-focused programmable logic controller
The large I/O quantity, small sub-panel foot print, intuitive “Blockware”, redundant memories, and built-in industry standard communication allows the DCS-III to be integrated into complex boiler control systems with a minimum number of external components

17. Easy Commissioning
The “Learn Mode” feature allows multiple F(x) block input vs. output profiles to be entered simultaneously with a push of a button!
“Store” button to simultaneously store the firing rate, oxygen and burner air flow rate value into the appropriate F(x) blocks

18. BurnerMate TS
Advanced
Communication…

19. Internet, Web Site Access
A standard WEB Browser provides remote monitoring and operation
Custom software is not required
Historical Alarm and event data can be imported to spreadsheet applications such as MS Excel

20. Intranet Communication
The ethernet communication port is easily assigned an IP address and connected to a facility wide network
Remote monitoring, control and data collection is available via a standard WEB Browser
Building Automation Systems and SCADA Systems are interfaced via industry standard MODBUS Ethernet communication

21. Integral Oxygen Analyzer
Field replaceable probe
ZP-xx
Only one conduit to stack.
Oxygen Probe
DCS-III with
"Z" Option Board
190130
Connecting Cable
Power Supply
Calibration Gas Input
Grade Level Connection By Others
No separate analyzer, one less item to mount

22. Integral Oxygen Analyzer
Proven Reliable
Sensing element has been proven reliable in 100s of installation over the last 10 years
No Reference Air
The probe uses ambient air as a reference.
Competitors use instrument air and run the risk of element cracking due to water
Automated, menu driven pushbutton calibration.
Fully automatic calibration package available.

23. Integral Oxygen Analyzer
Thick cell
Avoids premature cell failures
Ceramic heater
provides reliable long life
Complete detailed diagnostics
Automatic impedance checking
Alarms when time to recalibrate
Alarms when reaching end of cell life
Optional fuel gas temperature element T/C input

24. BurnerMate TS Control Strategies
Preferred Instruments has the experience and know how to design and integrate complete combustion systems……..
PCC II/III Combustion Control Projects....
> 1000 Boilers
624 Jackshaft Controlled Boilers
127 Parallel Positioning Controlled Boilers
103 Metering Controlled Boilers
351 Oxygen Trim Systems
13 EPA Compliant Opacity Monitors

25. Fully Metered System
Fully metered combustion control with oxygen trim in one controller! Note the quantity of I/O and the instrumentation involved. Existing field equipment may be reused or Preferred can provide the field equipment required.

26. Fully Metered System
This control strategy with oxygen trim and variable speed fan control offers the best opportunity to save fuel and electrical cost with a control system upgrade
This strategy measures both the fuel flow and the combustion air flow
PID control is used for both fuel and air flow control, assuring the accurate maintenance of fuel and air flow setpoints
Fully metered combustion control with oxygen trim in one controller! Note the quantity of I/O and the instrumentation involved. Existing field equipment may be reused or Preferred can provide the field equipment required.

27. Parallel Positioning System

28. Parallel Positioning System
This control strategy includes up to five (5) servo channels, allowing independent control of fuel valves, air and fuel gas re-circulation dampers
The fuel-air ratio is established and adjusted by use of a “soft” function curve of fuel valve vs. damper position
Parallel positioning enables “tighter” fuel-air ratio control, which improves boiler efficiency
Combining this control method with oxygen trim and variable speed fan control offers substantial cost savings for a fast payback

29. Single Point Positioning System

30. Single Point Positioning System
This control strategy mechanically links the fuel valve, air and flue gas control dampers to a single actuator
Generally, the fuel valve has a characterizable flow versus position relationship that is used to establish the fuel-air ratio over the range of modulation
This method is recommended when the boiler size or service hours do not justify addition of a VSD

31. BurnerMate TS Auxiliary Controller / Flame Safeguard
Preferred Instruments has the experience and know how to design and integrate complete combustion systems……..
PCC II/III Combustion Control Projects....
> 1000 Boilers
624 Jackshaft Controlled Boilers
127 Parallel Positioning Controlled Boilers
103 Metering Controlled Boilers
351 Oxygen Trim Systems
13 EPA Compliant Opacity Monitors

32. Integrated Auxiliary Controller
Draft Control – Stable & repeatable draft control is essential for efficient boiler operation. This is especially important for boilers with induced Flue Gas Recirculation (FGR) Nox reduction.
Feedwater Control – Single element, two element or three element feedwater control may be provided. Water column blowdown is prompted and logged to ensure proper maintenance.
Adding loops like drum level can be accomplished by added a second controller.

33. Flame Safeguard Features
The Flame Safeguard System provides the proper burner sequencing, ignition and flame monitoring protection on single burner, automatically ignited oil or gas fired boilers.
The system uses a fail-safe, “de-energize” to trip design. Upon the loss of system power the fuel safety shutoff valves are automatically closed and ignition components are de-energized.
Proven BMS by incorporating Preferred Instrument’s system know-how with the proven Fireye BMS.
Knowledge of NFPA In house staff have been on the Single burner NFPA 8501 committee

34. Flame Safeguard Features (continued)
On a safety shutdown, the message display will advise the operator that the control is in “Lockout” and will indicate the specific cause and the state in the operating sequence where the shutdown occurred.
Proof of purge, low fire position interlocks, and fuel valve end switch safety checks are also included.
A drum level conductivity probe relay is incorporated for an auxiliary Low Water Cutout safety interlock.

35. BurnerMate TS SCADA System Integration
Preferred Instruments has the experience and know how to design and integrate complete combustion systems……..
PCC II/III Combustion Control Projects....
> 1000 Boilers
624 Jackshaft Controlled Boilers
127 Parallel Positioning Controlled Boilers
103 Metering Controlled Boilers
351 Oxygen Trim Systems
13 EPA Compliant Opacity Monitors

36. SCADA System Supervisory Control And Data Acquisition:
Windows XP based workstations
Programmable Controller based combustion control hardware
Up to 31 I/O per controller
Touch Screen interface can be used as backup control station if the workstation, or communication network breaks down
“Service Manual” mode can be used as backup control station if the Loop Controller fails
The BurnerMate system with its local control and remote SCADA offers a high degree of security. A fault tolerant system is delivered for a low cost; data highway failure and PC lockup can not affect the operation of the boiler.

37. Expanded Remote Systems
With only a single PCC-III Multiple Loop Controller mounted at the boiler front this display offers operators a “multiple faceplate” view of the boiler control system. Operators may look at the boiler pressure loop, oxygen trim loop, air flow loop and fuel flow loop at the same time!

38. Process Style Boiler Overview
Process style displays provide a quick intuitive view of process conditions. Preferred brings decades of SCADA configuration to the design and layout of intuitive displays!

39. Flame Safeguard Overview
Complete burner information is collected in the SCADA package and is routed to the alarm and historical displays.

40. Store Data for Analysis Later
Historical displays allow the boiler’s operators and engineers the ability to “look back in time” to study a boiler incident, boiler performance, flame scanner signal strength, etc.

41. BurnerMate TS Competitive Comparison
Preferred Instruments has the experience and know how to design and integrate complete combustion systems……..
PCC II/III Combustion Control Projects....
> 1000 Boilers
624 Jackshaft Controlled Boilers
127 Parallel Positioning Controlled Boilers
103 Metering Controlled Boilers
351 Oxygen Trim Systems
13 EPA Compliant Opacity Monitors

42. Comparison

43. Comparison

44. Comparison

45. Comparison

46. Summary BurnerMate TS has….
Integrated fuel-air ratio, flame safeguard, draft, and feedwater controls
Single Point Positioning, Parallel Positioning, and Fully Metered Combustion Control
Single or Dual Fuel Flame Safeguard with easy trouble shooting.
Low Cost Full Scope Package.
Unit responsibility for controls, BMS and SCADA assures proper interface between the parts with no division of responsibility!

47. Preferred Utilities Manufacturing Corp
Preferred Utilities Manufacturing Corporation
31-35 South St. • Danbury • CT
T: (203) • F: (203)