1. Limited Trade Development Impeccable timely service
Modern Technology
Limited Trade Development
Own production
Impeccable timely service
2018г.

2. Limited Trade Development
Modern Technology
Limited Trade Development
About company:
The Modern Technology company is created in January, 2015 and specializes in rendering services in engineering and technological support of works with providing own equipment, in the following directions:
1. Cut "Windows" in the operational pillars and cut open the trunk using a whipstock.
2. Isolation of areas of leakage and perforation intervals of the production casing. Geography of works:
Services are provided in the following fields: Romashkinskoye, Berezovsky, Burachynska and Abdrakhmanovskaya, day, (Republic of Tatarstan), Mituhashi, Somolence, River, Kultuminskoye, Kowalewski, B. Dubovskoi, Kommunarovskaya (Samara region), Pokrovskoye, the Sorochinsko-Nikolskoye, Kolganskoe (Orenburg region), Kushnarenkovskogo, Askarovskiy, Al, Alginskoe, Buzovitsa, sergeevskaya, Znamenskoye, arlanskoe (Bashkortostan), Zhdanov (Saratov region), Kiya (the Irkutsk region).

3. heavy-weight drill pipe
Equipment for cutting a "window" - whipstock
INTENDED for cutting "window" in the casing and the open borehole, and drilling of the short barrel under the BHA in the desired direction during a single flight.
IT CONSISTS of a hydraulic anchor, whipstock with hydraulic system, a double milling cutter, an expanding milling cutter and an auxiliary tool.
TO MAKE cutting of a lateral trunk in the following sequence. Assembled at the mouth of the tool kit descends into a pre-drilled well at a predetermined depth. After the orientation of the wedge, a direct washing pump creates a pressure drop, through which the anchor opens, fixing whipstock in the casing. By tensioning the drill tool, the transport screw is cut, freeing the tool from the whipstock. Next, the milling of the window in the casing string begins, ending after the exit of the expanding part of the cutter behind the casing. Allowed the drilling of the Fraser short trunk under the BHA for the subsequent sidetracking.
tool
Orientation conductor
bypass valve
heavy-weight drill pipe
filter
steel drill pipe
double milling cutter
whipstock
hydraulic anchor

4. Equipment for cutting a "window" - whipstock
Advantages
It allows to cut the side barrel without cementing and support on artificial bottom in the trunks with anti-aircraft angles up to 90 degrees. Milling cutter reinforced with carbide plates, allows to obtain a high milling speed.
Simple in design and reliable anchor-expandable pipe withstands high axial and torsional loads .
The duration of the window milling is 2-9 hours, depending on the steel grade and the thickness of the casing wall in the cutting interval.

5. Hydraulic anchor - expandable pipe5
Hydraulic anchor - expandable pipe
Hydraulic anchor is made of an extensible pipe (production of "PEREKRYVATEL'" LLC) in length from 3M.
- 1 meter of open armature can withstand 70 tons of axial load.
- 100% anchoring in any interval as well as in the open barrel.
- Does not require the installation of a cement support bridge.
an extendable pipe to the disclosure
an extendable pipe after the disclosure

6. Accessories for whipstock
When assembling a whipstock in the well uses a special spider for the anchor and rod for fixation whipstock in the table of the rotor.
To Orient the deflector wedge in the well, an orientation translator is used, which is turned above the milling BHA.
For reducing the time that the trigger is applied to the overflow valve that is designed to fill the drill stem.

7. Equipment for cutting a "window" - whipstock.
The set of whipstock and technology allow to fix the whipstock in the open barrel of different diameters in case of accidents and the need to drill a bypass shaft, avoiding additional costs for the installation of cement bridges and the operating time of gutters for the escape from the emergency trunk

8. angle of inclination of the chute wedge, gr.
Technical characteristics of whipstock for standard sets.
equipment
D columns, мм D
open hole, мм
D anchor, мм
D cutter min, мм
cutter max, мм
wedge length, м
angle of inclination of the chute wedge, gr.
БС - 140
140
124
108
110
120
2,5
2,5 - 3
БС - 146
146
116
123
128
2,7
БС - 168
168
144
135
143
148
3,0
БС - 178
178
156
137
152
159
3,2
БС – 245
245
190, 216
196
215
220
4,0
БС - 340
340
295
289
300
314
6,0

9. Thank you for attention Our website: sovrt-ok.com
Modern
Technology
Thank you for attention
Microdistrict 34, bld. 14, apt 206  Oktyabryskiy, ,  Republic Of Bashkortostan,  Russian Federation.+7 (917) , +7 (34767)  
Our website: sovrt-ok.com