2. The #1 selling walk-behind mower from Exmark, offering the productivity of a hydro mower with a full-floating deck and quick cutting height adjustment

3. Target Customer
Landscape contractors who require the very best in durability, maneuverability in tight locations, and quality-of-cut that only a hydro full-floating deck mower can provide.

4. Key Value Propositions
Performance
Durability
Ease of operation

5. Performance
Engine
Choice of 15 or 17 HP Kawasaki KAI V-Twin recoil engines, or 19 hp Kawasaki KAI V-Twin engines with electric start for 48” and 52” models
The KAI air filtration system keeps grass, dirt, etc from getting into engine which improves reliability and performance while reducing downtime

6. Performance Fabricated commercial cutting deck
Patented Flow Control Baffles
Eliminates blowout and delivers our “see it to believe it” quality of cut
Reduce the amount of horsepower required while creating a superior vacuum that lifts the grass tall and straight for a clean, sharp cut
Concentrates the flow of air and forces grass clippings out to two and a half times the width of cut
Designed to give contractors the option to bag, mulch, or side-discharge
Height of cut range of 1.0” ”, and adjustable in .25” increments

7. Performance Full Floating Deck Design
Quick height adjustment system allows quick and easy cut height adjustments in the field without the need for tools
Four-point suspension system allows the deck to float from front to back and side to side, tracing the contours of the property to deliver superior striping and quality-of-cut
6 anti-scalp rollers allow the deck to trace contours and reduce scalping
Cutting height range of 1.5” to 4.5” in 0.5” increments

8. Performance Hydro Drive System
Hydro-Gear 10cc variable displacement pumps power high-efficiency Parker wheel motors
Allows greater maneuverability and productivity
Eliminates belt slippage in wet or hilly conditions
Infinite ground speed up to 6.20 mph forward and 2.25 mph in reverse
No need to declutch to go from forward to reverse as required on a gear-drive unit
Recoil start engines standard with cold weather start kit
Isolates the engine from the hydro system which eliminates parasitic load of the hydro system during cold weather

9. Performance Hydro Drive System continued..
Patented hydro idler arm with spherical bearings minimizes maintenance and maintains superior spring tension to competitive designs that use traditional bushings and ball bearings
Patented Insta-Trak fine tunes the mower’s tracking while on the go with the simple turn of a knob

10. Fabricated commercial cutting deck
Durability
Fabricated commercial cutting deck
Constructed of 7 gauge steel on the side and 10 gauge steel for the top deck plate
Sides and top deck plate are joined by a continuous-bead weld that follows the entire edge
Design provides exceptional strength, eliminating stress on the unit, and adding additional life to the overall machine
A rugged metal bumper protects from frontal impacts
Flexible discharge chute
Considerably more durable than steel chutes as it keeps its shape after impacts and reduces the likelihood of damaged trees, bushes, fences, etc.

11. Durability
Tires
Large 16 x 7.5 drive wheels on 48” and 52” models provide superior traction on inclines, get up easily over curbs, and minimize turf compaction
9 x 3.5 dual-yoke semi-pneumatic front castor wheels provide stability and also eliminate the hassle of flat tires

12. Ease of operation Enhanced Stability, Reliability and Control
Large frame and wide tracking stance maximizes traction on side-hills compared to competitive machines
The clutching belt is easily adjusted by removing the hair-pin and turning the turnbuckle until the two guide pins are located directly across from one another
Spring loaded idlers provide maximum belt tension
Parking brake eliminates the units from moving around on trailers

13. Ease of operation
Enhanced Control System (ECS)
The ECS delivers the ultimate in walk-behind comfort and ease of operation
Provides operators with better visibility and control, keeping them centered in the safety zone
Cushioned handles and drive levers optimize comfort and reduce fatigue
Grip distance is reduced to allow operators with large or small hands to operate the drive levers
Topside and inward positioning of the controls keeps operator’s hands farther away from obstacles

14. Key Feature
Benefit
Fully fabricated 36, 48, and 52 inch commercial cutting decks
Strength, diverse cut sizes and best-in-class quality of cut with the option to bag, mulch, or side-discharge
Full-floating deck with four point suspension
Easy height adjustment, follows contour of terrain for maximum cut quality
Enhanced Control System (ECS)
Ultimate design offers comfort and ease of operation
15, 17, and 19 hp Kawasaki KAI engines
Commercial built engine provides plenty of horsepower to the deck
16 x 7.50 Drive tires (48” and 52”)
16 x 6.50 Drive tires (36” only)
Large tires means superior tractions on side hills, simple navigation of curbs, and minimal turf compaction/marks
Semi-pneumatic front caster wheels
Eliminates flat tires and reduces downtime

15. Key Feature
Benefit
10cc Hydro-Gear pumps with Parker wheel motors
Provides greater maneuverability, efficiency, and positive reverse while eliminating belt slippage
Air filtration system
Increased engine reliability and performance
Heavy duty tractor design
Provides greater traction on hills as well as greater durability than competitive models
Hydro Idler arm with spherical bearings
Greatly reduce friction compared to competitor’s traditional bushings and ball bearings. Reduce maintenance
Flexible Discharge Chute
More durable than steel chutes as it is designed to keep its shape after impacts

16. Models Model Overview Model Description THP15KA363
15 HP Kawasaki KAI, ECS, 32” cutting deck
THP17KA483
17 HP Kawasaki KAI, ECS, 48” cutting deck
THP17KA523
17 HP Kawasaki KAI, ECS, 52” cutting deck
THP19KAE483
19 HP Kawasaki KAI, electric start, ECS, 48” cutting deck
THP19KAE523
19 HP Kawasaki KAI, electric start, ECS, 52” cutting deck

17. Accessories
Exmark Accessories provide even greater profit opportunities for dealers!
Mulch Kits
Increases productivity by finely cutting grass, leaves and other debris and dispersing in lawn.
Great for areas where side discharge is not feasible and bagging is costly.
StandOn Sulky
Increase productivity and rider comfort by adding the Exmark StandOn Sulky.
Greater ability for operator to see out over deck.
Minimizes operator fatigue.
Greater durability and ease of attachment than competitive sulkies.
Turf Striping Kits
Enhances the striping performance of the machine.
Attaches easily to the unit.
3-bushel grass catcher
Catches clippings for easy disposal.
Attaches easily without the use of tools.