Presentation is loading. Please wait.

Presentation is loading. Please wait.

Chapter 2 Navier-Stokes Modeling for HAWT by CFX 5.7

Similar presentations


Presentation on theme: "Chapter 2 Navier-Stokes Modeling for HAWT by CFX 5.7"— Presentation transcript:

1 Chapter 2 Navier-Stokes Modeling for HAWT by CFX 5.7
Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT”

2 Rotor Geometry FIL-1000 1. Diameter : 54.5 m
2. Rated Power : 1MW (Design wind speed – 10 m/s) 3. TSR : 7.5 (Design point) 4. Rotating Speed : rpm Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” 5. Power Control Type : Stall regulated 6. Airfoil Sections : NACA 63415, NACA 63418, DU-Series, FFA Series (From Tip to Hub)

3 Details of Specification
ROOT Local Posistion Twist(deg) Position(mm) Chord (mm) Airfoil series 0.20 17.9 5450 FFA-W-301 0.25 14.4 6812 0.30 11.7 8175 0.35 9.73 9537 0.40 8.14 10900 DU91-W2-250 0.45 6.87 12262 0.50 5.83 13625 DU93-W2-210 0.55 4.97 0.60 4.24 0.65 3.62 0.70 3.08 NACA63(2)-418 0.75 2.60 0.80 2.17 1367.4 0.85 1.77 0.90 1.35 NACA63(2)-415 0.95 0.83 1.00 946.78 Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” TIP

4 Geometry Modeling Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT”

5 Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT”

6 Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT”

7 Computational Mesh • Mesh Generation : ICEM-CFD 5.0
Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” • Mesh Generation : ICEM-CFD 5.0 • Mesh Type : Unstructured Hexa • 480,000 nodes

8 Computational Mesh • Chord length : 175 nodes
Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” • Chord length : 175 nodes • Radial direction : 40 nodes • O-GRID

9 Computational Mesh • Chord length : 175 nodes
Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” • Chord length : 175 nodes • Hybrid-Mesh : Casing (Tetra-Prism) • 220,000 nodes

10 Turbulence Modeling # K-W SST Model with High Resolution
Accounts for the transport of the turbulence shear stress and gives very highly accurate predictions of the onset and the amount of flow separation under adverse pressure gradients Improve the accuracy for the predictions of the flow separation from a smooth surface : Important phenomenon in many industrial fields, particularly for airplane industries Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” The most prominent two equation model Ref.: Menter, F.R.., “Two equation eddy-viscosty turbulence models for engineering applications” AIAA Journal, 32(8), 1994

11 Calculation Conditions
TSR Wind Speed Rotating Speed 2 37.48 m/s 26.28 rpm 3 24.98 m/s 4 18.74 m/s 5 14.99 m/s 6 12.49 m/s 7.5 9.99 m/s 9 8.33 m/s 10 7.49 m/s 11 6.81 m/s 12 6.24 m/s 13 5.76 m/s Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT”

12 Boundary Conditions • Inflow (Normal velocity)
• Rotating Frame + Stationary Frame • Periodic surfaces(GGI) • Frame change model : Frozen rotor Interface with rotor and casing Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” • Outflow (Static Pressure)

13 Results Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” TSR : 3 TSR : 7.5 TSR : 10 Surface Pressure Distribution on the Suction Side

14 Results Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” TSR : 3 TSR : 7.5 TSR : 10 Surface Streamline on the Suction Side

15 Results TSR : 3 TSR : 7.5 TSR : 10 Sliced Streamline – 5m from Root
Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” TSR : 3 TSR : 7.5 TSR : 10 Sliced Streamline – 5m from Root

16 Results TSR : 3 TSR : 7.5 TSR : 10 Sliced Streamline – 10m from Root
Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” TSR : 3 TSR : 7.5 TSR : 10 Sliced Streamline – 10m from Root

17 Results TSR : 3 TSR : 7.5 TSR : 10 Sliced Streamline – 15m from Root
Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” TSR : 3 TSR : 7.5 TSR : 10 Sliced Streamline – 15m from Root

18 Results TSR : 3 TSR : 7.5 TSR : 10 Sliced Streamline – 20m from Root
Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” TSR : 3 TSR : 7.5 TSR : 10 Sliced Streamline – 20m from Root

19 Results Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT”

20 Future Works 수행완료 Nice to meet you ladies and gentleman, I’m BeomSeok, KIM from graduate school of Korea Maritime University. Today, the title of my presentation is “A Study on Configuration Design and Performance Analysis for HAWT” 진행 예정


Download ppt "Chapter 2 Navier-Stokes Modeling for HAWT by CFX 5.7"

Similar presentations


Ads by Google